MAX S400 HD EN V1.1 - FTE Maximal
MAX S400 HD EN V1.1 - FTE Maximal
MAX S400 HD EN V1.1 - FTE Maximal
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>EN</strong>GLISH<br />
PANEL & REMOTE CONTROL DESCRIPTION<br />
This user’s guide is adapted to the version v.11B7 dated 28/11/2011. For future software<br />
updates, you can download the user’s guide from the following website:<br />
http://www.ftemaximal.com<br />
1. PANEL & REMOTE CONTROL DESCRIPTION<br />
1.1. FRONT PANEL DESCRIPTION<br />
1 2 3 4 5<br />
6<br />
1. IR-S<strong>EN</strong>SOR: Reception sensor for the IR remote control signals.<br />
2. DISPLAY: 4 Digits to display the program numbers.<br />
3. STAND BY LED: Shows the state of the receiver.<br />
4. LOCK LED: Indicates a suffi cient signal level at the ANT IN input.<br />
5. BUTTONS: These buttons allow controlling some functions of the receiver.<br />
6. USB: USB Connector 2.0<br />
1<br />
6<br />
2<br />
1.2. REAR PANEL DESCRIPTION<br />
3 4<br />
5<br />
7<br />
8<br />
1. IF OUT: Satellite output for cascading to other devices.<br />
Note: The operation of another receiver at the same time is only possible with limited channel<br />
selection.<br />
2. IF IN: Satellite input.<br />
3. RS-232<br />
4. S/PDIF: Coaxial output for digital audio (AC3).<br />
5. POWER ON/OFF: Allows to completely switching off the receiver.<br />
6. AUDIO: Audio output for home audio systems.<br />
7. TV SCART: Output SCART for the connection to a TV set.<br />
8. <strong>HD</strong>MI: <strong>HD</strong>MI output for connecting to a TV<br />
9. POWER ON/OFF: Allows to completely switching off the receiver.<br />
PAG. 12<br />
9<br />
rev 1.1