Installation instructions Toyota Corolla - Funkwerk Dabendorf GmbH

More documents

Recommendations

Info

5.4 5.5 1. EGO TS Connection Concept Microphone Control unit Connection Mounted cable charger (optional) <strong>Installation</strong> of the components In order not to cause any damage while dismantling the interior panelling it is advisable to use the so-called dismantling wedges! These leave no marks on the plastic parts! Remove the gear lever knob by turning and the sleeve of the gear lever and the surrounding interior panelling parts. To be able to remove the front panel, you pull the central control dial off and remove the screw positioned behind it.
2. 3. 4. Remove the front panel. Now loosen the screws under the radio on the left and right. Carefully pull the radio out of the ventilation slot together with the ventilation unit. Remove the connectors of the radio. 10 | 11
Page 1 and 2: 128 8224 1.02 GB English Installati
Page 3 and 4: 1 Introduction / Preface Congratula
Page 5 and 6: 3 Conformity statement This equipme
Page 7 and 8: 5 5.1 - - - Installation instructio
Page 9: 5.3 5.3.1 Mounting Components DAMAG
Page 13 and 14: 8. Lay the microphone at a convenie
Page 15 and 16: 5.8 Getting started Take enough tim
Page 17 and 18: 7 Spares Spares and accessories À
Page 19 and 20: 10 Hotline Any questions or suggest

Installation instructions Toyota Corolla - Funkwerk Dabendorf GmbH

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?