Installation instructions Toyota Corolla - Funkwerk Dabendorf GmbH

More documents

Recommendations

Info

5. 6. 7. EGO TS Connect the adapter cables specific for the car. Lay the connection line to the electronic box. Please pay attention to our explanatory notes on the point of installation of the electronic box in Chapter 5.2.2. Carefully dismantle the panelling of the speedometer unit. * The connector cable to the electronic box is installed behind the speedometer unit. Choose a free installation slot for the EGO TS control unit. Carefully remove the covering and replace it by the control unit. * Control panel element on the left next to the steering wheel.
8. Lay the microphone at a convenient spot, pay attention to our explanatory notes in Chapter 5.2.3. 9. Connect the control unit, the microphone and the system plugs to the electronic box. NOTE: To prevent rattling sounds that may possibly occur we recommend that the cables be fastened with cable straps and to position the electronic box tightly in the car. 12 | 13
Page 1 and 2: 128 8224 1.02 GB English Installati
Page 3 and 4: 1 Introduction / Preface Congratula
Page 5 and 6: 3 Conformity statement This equipme
Page 7 and 8: 5 5.1 - - - Installation instructio
Page 9 and 10: 5.3 5.3.1 Mounting Components DAMAG
Page 11: 2. 3. 4. Remove the front panel. No
Page 15 and 16: 5.8 Getting started Take enough tim
Page 17 and 18: 7 Spares Spares and accessories À
Page 19 and 20: 10 Hotline Any questions or suggest

Installation instructions Toyota Corolla - Funkwerk Dabendorf GmbH

Create successful ePaper yourself

Delete template?

Save as template?