Sgdhsgh fdftdh rth fh fgh fghfgh fgh fgh fgh fgh fdh dfh ... - Fixturlaser

More documents

Recommendations

Info

EVALUATING THE RESULT The angle and offset values are used to determine the alignment quality. These values are compared with the alignment tolerances to determine whether correction is necessary. If suitable tolerances are selected in the tolerance table, the symbols described above indicate if the angle and offset values are within tolerance or not. The foot values indicate the movable machine’s foot positions where corrections can be made. Depending on the result, the program will also guide the user. First, the program will always recommend the user to save the measurement. Then, if the measurement result shows that the machine is misaligned, the user will be recommended to go to shimming. If the measurement result is within tolerance, the system will recommend the user to exit the measurement. Save the measurement result. Go to shimming. <strong>Fixturlaser</strong> GO Pro Manual 3 rd edition 6.18
SHIMMING The Shimming screen shows foot values in the vertical direction as suitable shim values. The arrows show if shims must be added or removed to adjust the machine in the vertical direction. The check signs show that shimming is not needed. When shimming is completed, continue to alignment for adjustments in the horizontal direction. Go to alignment. <strong>Fixturlaser</strong> GO Pro Manual 3 rd edition 6.19
Page 1: Fixturlaser GO Pro user`s MANUAL
Page 4 and 5: Fixturlaser GO Pro Manual 3 rd edit
Page 6 and 7: END USER LICENSE AGREEMENT The righ
Page 8 and 9: The laser is classified in accordan
Page 10 and 11: LASER PRECAUTIONS Fixturlaser GO Pr
Page 12 and 13: Handle any batteries with care. Bat
Page 14 and 15: The chains on the V-block fixtures
Page 16 and 17: APPLICATION PROGRAMS Shaft Alignmen
Page 18 and 19: PRE-ALIGNMENT FUNCTIONS In an effor
Page 20 and 21: MOUNTING The sensor marked “M”
Page 22 and 23: The laser of the M-sensor can be ad
Page 24 and 25: TOLERANCE TABLE Alignment tolerance
Page 26 and 27: SETTINGS Settings unique for this a
Page 28 and 29: Turn off inclinometers If the incli
Page 30 and 31: SOFTCHECK TARGET VALUES Go to Softc
Page 32 and 33: Select the register icon and press
Page 36 and 37: ALIGNMENT If the machine has been a
Page 38 and 39: OTHER FEATURES M and S unit LED fun
Page 40 and 41: Measurement with disabled inclinome
Page 42 and 43: PRE-ALIGNMENT FUNCTIONS In an effor
Page 44 and 45: SETTINGS Settings unique for this a
Page 46 and 47: ENTER DIMENSIONS The screen display
Page 48 and 49: Rotate the shafts 90° to the secon
Page 50 and 51: EVALUATING THE RESULT The angle and
Page 54 and 55: STARTING THE PROGRAM Start the prog
Page 56 and 57: MEASUREMENT VALUE REGISTRATION Sele
Page 58 and 59: SHAFT ALIGNMENT Return to shaft ali
Page 60 and 61: STARTING THE PROGRAM Start the Targ
Page 62 and 63: ANGLE AND OFFSET VALUES Select the
Page 66 and 67: The Memory has the capacity to stor
Page 68 and 69: TRANSFER FILES TO A PC 1. Turn on t
Page 70 and 71: SHAFT ALIGNMENT FOR VERTICAL MACHIN
Page 72 and 73: Measurement unit Changes between mm
Page 74 and 75: 1. USB slave 1 OPERATING MODES The
Page 76 and 77: BACKLIGHT If no button is pressed w
Page 78 and 79: The upgrade file will be automatica
Page 80 and 81: OPERATION In order for the display
Page 82 and 83: WIRELESS SETTINGS The Wireless Sett
Page 84 and 85:
Choose the unit to pair with the di
Page 86 and 87:
Fixturlaser GO Pro Manual 3 rd edit
Page 88 and 89:
Peripherals 1 USB slave port Wirele
Page 90:
Measurement distance Up to 10m Dete
show all

Sgdhsgh fdftdh rth fh fgh fghfgh fgh fgh fgh fgh fdh dfh ... - Fixturlaser

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?