Air heating - Giordano Benicchi
Air heating - Giordano Benicchi
Air heating - Giordano Benicchi
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
7.5 Fuel filter<br />
Marine <strong>heating</strong> system Installation Instructions<br />
Use of a fuel filter is necessary for protecting from contamination. Install before the metering<br />
pump.<br />
If installing in the engine compartment, use only fire-resistant types in accordance with ISO 7840.<br />
7.6 Auxiliary tank<br />
If an auxiliary tank is required for the <strong>heating</strong> system fuel supply:<br />
installation only by a specialist in marina applications (know-how about applicable standards,<br />
regulations and directives).<br />
7.7 Special instruction for petrol-driven heaters in boats<br />
WARNING!<br />
The inappropriate installation of a petrol-driven heater in a petrol-driven boat increases<br />
the fire hazard. Local regulations as well as special safety measures are to be<br />
observed.<br />
Installation of a petrol-driven heater is only to be carried out by an authorized Webasto ® Partner<br />
and/or with the direct support of Webasto ® !<br />
• The motor compartment of petrol-driven boats and ships must be vented before the <strong>heating</strong><br />
system is started. Appropriate stickers must be affixed close to the controls.<br />
• Do not install <strong>heating</strong> systems where flammable vapors can accumulate.<br />
• The combustion air intake must come from the outside, not from the engine compartment.<br />
• Components with a surface temperature > 80°C are not permitted – use insulation.<br />
• Install the metering pump in the coolest place possible
Change language