Air heating - Giordano Benicchi

Marine heating system Installation Instructions
10.5 Consumption water heating
Consumption water heating by an additional boiler for showering, rinsing, washing, etc.
Integration into open and closed water heating system possible.
Use of a 3-way valve allows consumption water heating in summer without heating the boat.
Recommendation: use a pre-installed ”Webasto ® Plug&Heat Water station“ (circulation control
with connections).
Boiler
• various sizes can be used
• with one/two heat exchangers
• Optional: electrical heater elements.
Model with two heat exchangers: Boiler can be heated from heating circuit and/or engine
circuit.
If necessary, additional buffer vessels ensure minimum water volume is also guaranteed in summer.
Connection of a boiler with double heat exchanger in heating and engine circuit (open system)
Legend on page 33
10.6 Temperature control
Recommendation: temperature control of interior thermostat controlled.
Use thermostat valves for convectors or heating elements.
Blower heat exchanger: thermostat controlled blower control also possible.
A direct setting of the water temperature is not possible. The heating system tries to maintain a
preset range.
© Webasto Global Comfort Solutions ® 35