Air heating - Giordano Benicchi
Air heating - Giordano Benicchi
Air heating - Giordano Benicchi
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Marine <strong>heating</strong> system Installation Instructions<br />
Install a bleed valve (automatic or manual): at high point or near difficult to reach locations; in<br />
return line.<br />
10.4 Heat exchanger<br />
Possible heat exchangers:<br />
Plate heater body: small weight, flat construction, even heat distribution, relatively large surface for<br />
good efficiency, silent.<br />
Convectors: good heat output with good air circulation and wide construction, silent.<br />
Achieve fireplace effect. See illustration (side view).<br />
When installing convectors, ensure there is good air convection<br />
Blower heat exchanger: optimal heat exchange with compact construction, requires power.<br />
Blower heat exchanger positioning: if possible, close to the bottom. Good accessibility (for<br />
bleeding). Pay attention to sufficient fresh air supply.<br />
<strong>Air</strong> distribution using hoses is possible. Hoses: keep them as short as possible.<br />
Avoid air short circuits (intake of exhaust hot air).<br />
Avoid air short circuits (top view): 1) Blower heat exchanger; 2) <strong>Air</strong> outlet; 3) <strong>Air</strong> inlet<br />
34 © Webasto Global Comfort Solutions ®
Change language