Air heating - Giordano Benicchi
Air heating - Giordano Benicchi
Air heating - Giordano Benicchi
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Marine <strong>heating</strong> system Installation Instructions<br />
10.7 Electrics<br />
Interfaces to 4 main components.<br />
1. Power supply: from battery, directly from the boat’s supply system.<br />
2. Metering pump: connect cable harness to metering pump (only for Thermo Top C ® and Thermo<br />
90ST ® ).<br />
Polarity not important. If length is not sufficient, use an extension cable (accessory).<br />
3. Connect control (on/off switch) to cable harness.<br />
4. Circulation pump (each type separately).<br />
Connect the cable harness to the <strong>heating</strong> system controller.<br />
Heating system circuit diagram and cabling details: see device-specific installation instructions.<br />
Principles of connection of the main components for water <strong>heating</strong> according to illustrations.<br />
Thermo 90ST ® DBW 2010/2016 ®<br />
Thermo 230/300/350 ® Thermo Top C ®<br />
Legend:<br />
1 Heater unit<br />
2) Main cable harness<br />
4) Fuses<br />
5) Battery<br />
7) Metering pump cable harness<br />
10) Circulation pump<br />
11) Control and/or on/off switch<br />
36 © Webasto Global Comfort Solutions ®
Change language