TT225 StageIII+ Installation Manual.pdf - APR

More documents

Recommendations

Info

21. Route the supplied 10ga wire in bag 7 from new fuel pump along side the fuel lines as indicated in image. Be sure and Route the wire through the fuel line trough up into the engine bay. Route it behind the fi re wall as indicated over to the driver’s side wire trough where the fuel pump relay will be located.
22. Use a small section of the excess 10ga wire and supplied crimp ring terminals to ground the pump as indicated in image. 23. Use the remaining excess 10 ga wire and female quick disconnect terminal to run from the relay to the 30amp inline fuse as outlined in image. It is recommended to install the inline fuse close to the battery for easy access if it were to need replacing. AUDI PERFORMANCE & RACING 1027-B Opelika Road Auburn Alabama 36830
Page 1 and 2: AUDI PERFORMANCE & RACING 1 0 2 7 -
Page 3 and 4: items such as turbo kits, spare ECU
Page 5: includes a 3” downpipe. The APR S
Page 8 and 9: 12. Install coolant feed and return
Page 12 and 13: 24. Use a section of the 12ga wire
Page 14 and 15: 27. Mount the new fuel fi lter as i
Page 16 and 17: 33. With included hardware from bag
Page 18 and 19: 42. Reinstall PCV valve into MAF ho
Page 20: AUDI PERFORMANCE & RACING 1027-B Op

TT225 StageIII+ Installation Manual.pdf - APR

Create successful ePaper yourself

Delete template?

Save as template?