TT225 StageIII+ Installation Manual.pdf - APR

More documents

Recommendations

Info

27. Mount the new fuel fi lter as indicated in image with hardware from bag 2. Fuel flow direction is down. Route pre-attached fuel line to fuel rail as indicated by dotted line. Reroute existing fuel feed line over to new fuel fi lter. 28. Remove throttle body hose. 29. Remove plastic pipe below the driver’s side head light containing the stock boost sensor. Remove the boost sensor. Install <strong>APR</strong> adaptor plate with o-ring down as indicated in image. Install new <strong>APR</strong> boost sensor with connector pointed towards the passenger’s side of the vehicle. Replace the plastic pipe. Cut off stock connector for the boost sensor and splice in new connector as follows: blue/brown wire to pin 1, green/violet wire to pin 3, and blue/violet wire to pin 4.
30. Install new throttle body hose (Z1001058). 31. Install compressor exit and compressor inlet hoses with supplied clamps from bag 13 and 14 as indicated in the kit confi guration drawing just before step one of the installation guide. 32. Reinstall diverter valve as indicated in image. AUDI PERFORMANCE & RACING 1027-B Opelika Road Auburn Alabama 36830
Page 1 and 2: AUDI PERFORMANCE & RACING 1 0 2 7 -
Page 3 and 4: items such as turbo kits, spare ECU
Page 5: includes a 3” downpipe. The APR S
Page 8 and 9: 12. Install coolant feed and return
Page 10 and 11: 21. Route the supplied 10ga wire in
Page 12 and 13: 24. Use a section of the 12ga wire
Page 16 and 17: 33. With included hardware from bag
Page 18 and 19: 42. Reinstall PCV valve into MAF ho
Page 20: AUDI PERFORMANCE & RACING 1027-B Op

TT225 StageIII+ Installation Manual.pdf - APR

Create successful ePaper yourself

Delete template?

Save as template?