TT225 StageIII+ Installation Manual.pdf - APR

More documents

Recommendations

Info

24. Use a section of the 12ga wire and the supplied crimp connectors to connect the relay to ground. Ground the relay at the main ground stud under the battery. 25. With the remaining 12ga wire, connect the relay to the fuel pump signal. As indicated in the image, route the wire through the fi re wall and to the fuse panel.
26. Remove the fuse panel so that you can access the wires behind. With the supplied connector, tap the 12ga wire into the blue and red stripped wire. Replace fuse panel. Relay Connection Diagram pin 30 - To Pump pin 85 - To Ground pin 86 - To Signal pin 87 - To Battery AUDI PERFORMANCE & RACING 1027-B Opelika Road Auburn Alabama 36830
Page 1 and 2: AUDI PERFORMANCE & RACING 1 0 2 7 -
Page 3 and 4: items such as turbo kits, spare ECU
Page 5: includes a 3” downpipe. The APR S
Page 8 and 9: 12. Install coolant feed and return
Page 10 and 11: 21. Route the supplied 10ga wire in
Page 14 and 15: 27. Mount the new fuel fi lter as i
Page 16 and 17: 33. With included hardware from bag
Page 18 and 19: 42. Reinstall PCV valve into MAF ho
Page 20: AUDI PERFORMANCE & RACING 1027-B Op

TT225 StageIII+ Installation Manual.pdf - APR

Create successful ePaper yourself

Delete template?

Save as template?