general catalogue emac - Keraben CR
general catalogue emac - Keraben CR
general catalogue emac - Keraben CR
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Structural<br />
joints<br />
solutions<br />
Novojunta Pro ® Móvil<br />
movement allowed: +/–5 mm<br />
06<br />
Certified quality:<br />
Anodized QUALANOD<br />
Lacquered QUALICOAT<br />
h: 20, 35, 50, 70 mm<br />
length: 2’5 m<br />
with a plastic fi lm<br />
You can use the 170 mm sealant membrane. With dividers on its outer face for a correct installation.<br />
material h a packing color Nº code price/ml<br />
20 mm<br />
2 u.<br />
natural 11 NJPMAL2071 112,87 €<br />
anod. matt silver 13 NJPMAL2071PL 117,59 €<br />
(Go to page 76)<br />
Semi-heavy<br />
weight<br />
Aluminum<br />
35 mm 2 u.<br />
a 1 71 mm<br />
a 2 50 mm<br />
50 mm 1 u.<br />
natural 11 NJPMAL3571 133,48 €<br />
anod. matt silver 13 NJPMAL3571PL 138,81 €<br />
natural 11 NJPMAL5071 159,45 €<br />
anod. matt silver 13 NJPMAL5071PL 163,63 €<br />
70 mm 1 u.<br />
natural 11 NJPMAL7071 179,30 €<br />
anod. matt silver 13 NJPMAL7071PL 183,81 €<br />
Novojunta Pro ® AL30<br />
The model Novojunta Pro ®<br />
Movil can also be assembled<br />
combining different heights<br />
movement allowed: +/–4’7 mm<br />
longitud: 2’5 m<br />
Pre-formed system of profi les for structural joints made of anodized aluminum, which allows movements with 6 degrees of<br />
freedom (DOF). To be placed after the tiling process and easy to install.<br />
material h a packing color Nº code price/ml<br />
Medium<br />
weight<br />
(Go to page 76)<br />
Aluminum<br />
3’8 mm<br />
a 1 : 82 mm<br />
a 2 : 30 mm<br />
12 u. anod. matt silver 13 NJPAL30PL25 50,05 €<br />
• All EMAC ® juntas PRO ®<br />
are already assembled and<br />
ready to install<br />
• We provide all technical<br />
sheets at our web:<br />
www.<strong>emac</strong>.es.<br />
• If you have any inquiry or<br />
you need any technical<br />
data, please do not<br />
hesitate to contact our<br />
Technical Department:<br />
otecnica@<strong>emac</strong>.es<br />
• Please, check our Guide<br />
“How to choose the most<br />
appropriate Structural<br />
Joint” at the Download<br />
Section of our web site<br />
www.<strong>emac</strong>.es<br />
LIGHT WEIGHT<br />
It allows traffi c of F Category following the ACI (American Concrete Institute) standards, ACI 302.1R-89<br />
and ACI 360R-92, for light vehicles with a net weight < 30kN and < than 8 seats disregarding the driver’s<br />
one. FL1 classification carts following the ACI (American Concrete Institute) standards, ACI 302.1R-89 and<br />
ACI 360R-92 with pneumatic or infl exible wheels, with a net weight of 21kN and a total load up to 10kN.<br />
It allows static overload less than 1t/m² and the vehicle crossing with pneumatic wheels with less than<br />
1t/axle following the NTE-RSC classifi cation as light weight load upon bottom plate. Central and lineal<br />
weight of 0.5kN.<br />
MEDIUM WEIGHT<br />
It allows traffic of G Category following the ACI (American Concrete Institute) standards, ACI 302.1R-89<br />
and ACI 360R-92, for light vehicles with a net weight < to 30kN and < than 160 kN divided between both<br />
axles. Infl exible and pneumatic wheeled carts with FL 1, 2 and 3 classifi cations with a net weight of<br />
44kN and a load up to 25kN, with a total weight per axle of 63kN following the ACI (American Concrete<br />
Institute) standards, ACI 302.1R-89 and ACI 360R-92. It allows static overload less than 5t/m² and vehicle<br />
crossing with pneumatic wheels with less than 2.5 t /axle following the NTE-RSC classifi cation as light<br />
weight load upon the bottom plate. Central and lineal weight of 0.8kN.<br />
SEMI-HEAVY WEIGHT<br />
It allows traffic of G Category following the ACI standards, American Concrete Institute ACI 302.1R-89 and<br />
ACI 360R-92, for light vehicles with a net weight < to 30kN and < than 160 kN divided between both axles.<br />
Infl exible and pneumatic wheeled carts with FL 1, 2 and 3 classifi cations with a net weight of 60kN and<br />
a load up to 90kN, with a total weight per axle of 63kN following the ACI standard, American Concrete<br />
Institute ACI 302.1R-89 and ACI 360R-92. It allows static overload less than 5t/m² and vehicle crossing<br />
with pneumatic wheels with less than 2.5 t/axle following the NTE-RSC classification as light weight load<br />
upon the bottom plate. Transport vehicles up to 38kN per axle, in simple axle models. It can support up<br />
to 60kN per axle with slow traffi c.<br />
76<br />
ORDERS<br />
Fax: (+34) 961 532 261<br />
Email: export@<strong>emac</strong>.es<br />
Buy online at... www.<strong>emac</strong>.es/en