general catalogue emac - Keraben CR

12
THE MATERIALS’ TECHNICAL CHARACTERISTICS
The careful choice of materials with which Emac profi les are manufactured is the main reason for the high
quality of these products. Comprehensive tests are carried out on their composition, strength, color and
other factors. These are carried out in Emac® and REDIT technological institutes (The Network of Technological
Institutes of Valencia) to ensure the qualities and useful properties of each batch manufactured.
1.4301 (WNR.) STAINLESS STEEL AISI 304 (V2A)
Exceptional quality stainless steel certifi ed by AIMME (the Metalworking Technology Institute) by means of a
LECO CS 230 elemental analyzer and JY Ultima 2 inductively coupled plasma atomic emission spectrophotometry,
following standards for each batch. It passes salt spray corrosion tests with excellent results.
The fi nishes available are high gloss, brushed and the innovative Emac® Futura range which, due to its titanium,
increases the mechanical strength and rust resistance of stainless steel, providing a unique color that
is remarkable for its beauty.
ALUMINUM (EN-AW-6063)
The alloy used in Emac® aluminum profi les is 6063. The N-Listel Texturas and N-Listel Crystal types use the
1050A alloy, with similar properties.
The anodized procedure is certifi ed and carried out according to the strict guidelines of the quality brand
QUALANOD (EWAA/EURAS).
The lacquering procedure is certifi ed and carried out according to the strict guidelines of the quality brand
QUALICOAT.
Coating is carried out with technology for checking on microbiological deterioration carried out with the utmost
meticulousness. It is long-lasting and active against bacteria, fungi, yeasts and molds.
MAXI
This material is WPC (Wood Plastic Composite) composed of PVC and vegetable fi bers. The formulation was
developed exclusively through Emac®’s innovative work to continuously improve in order to attain the best
properties for many applications. This is an environmentally friendly material that uses recycled agricultural
waste to obtain a high quality product with advantages that have been certifi ed by several technological
institutes in REDIT.
Because some of the raw material is natural, there may be differences in hues that should not be considered
to be manufacturing defects.
Fitting Maxi outdoors may lead to a natural change in its original color, with an appreciably greater range of
earthy colors. To avoid these possible variations in color when faced with continuous exposure to sunlight,
we recommend fi tting the Maxi range indoors. For outdoors, we recommend the MaxiKenya range, which
has excellent weather resistance and is unaffected by exposure to the sun.
Maxi has a characteristic rough or grooved surface (in MaxiKenya) which gives it a high slip resistance that
has been tested and certified according to the UNE-ENV 12633:2003 standard and according to the DIN 51130
standard for transit with shoes.
METHACRYLATE
Emac® Methacrylate profi les are very resistant to weather and humid or submerged conditions, so they are
ideal for use in swimming pools. They have a glossy fi nish and their color does not change over time or as a
result of exposure to UV rays.
96
ORDERS
Fax: (+34) 961 532 261
Email: export@emac.es
Buy online at... www.emac.es/en