Overview of the Jetbroom, airport version - Boschung

Technical modifications reserved.
Further products by Boschung
Boschung snow cutter/blower in
operation at Simplon pass
Boschung
vacuum
sweeper
Stationary thawing
agent spray systems
Stationary ice early
warning system
273 en a 2
Production facilitites
in Matran
Marcel Boschung AG
in Schmitten
Boschung
spreader
Boschung Jetbroom
highway version
Marcel Boschung AG
Route des Muëses 2 l CH-1753 Matran
Tel. ++41 26 497 85 85 I Fax ++41 26 497 85 90
info@boschung.com I www.boschung.com
Multi-purpose vehicle
Boschung Pony
High performance airport
surface clearing!

Multipurpose high
performance solution for all
airport surfaces
Marcel Boschung AG's Jetbroom is the optimal solution
for the ever-increasing demands of airport surface
maintenance personnel, based on Boschung's house
designed chassis in 2 or 3 axle version. Both engines
(main engine and work engine) deliver together more
than 800 HP. The unique blowing system includes
2 blowers (in front of the broom and in front of the rear
axle or at the rear of the vehicle). The system is powered
either by 1 horizontal or 2 vertical turbine(s). The
following main functionality is possible:
• Snow clearing with plow/broom/2 blowers
• De-icing (solid, liquid or mixed material). This can be
combined with snow clearing in one run
• Vacuum Sweeper
• Liquid recovery with rear suction equipment
• Rubber residue removal (a vacuum sweeper function)
• Steering with Vpad:
Central control with the
Vpad control unit in the
cabin. 2 joysticks enable
independent steering of the
plow and the broom.
Alternately, both can be
steered with the same joystick.
If a spreader is mounted, a
2 nd Vpad unit controls it
• Multisegment snow plow
MF 84
8.4 m wide snow plow for
conventional front attachment
or with quick assembly plate
Attachment and removal
controlled from the driver's
cabin
in detail
• Multisegment snow plow MF 2S / 84
8.4 m wide snow plow for conventional
front attachment with segments on both
ends able to flip 90° in order to reduce
passage width
• Maintenance:
Tipping the rear
module allows easy
access to the maintenance
area
Overview of the Jetbroom, airport version
• Carrier vehicle available
in 2 or 3 axle version.
Ready to fit the various
attachments
4-wheel drive
4-wheel steering,
incl. diagonal drive
Separate drive and
attachment engines
with over 800 HP
16-gear automatic
gearbox
Dislocation speed
85 km/h
Hydraulic
suspension
CAN-bus
• Multisegment snow plow MF 10.3
6.4 m wide snow plow for conventional
front attachment
• Tippable rear module:
The rear module can be tipped
completely (with attachments), thus
allowing emptying of the hopper and
access to hydraulic and electrical parts
• High Performance Multifunctional Vehicle
for summer and winter. The 4.2 m - wide
broom provides the following functionality:
· Snow removal
· De-icing
· Vacuum Sweeper
· Liquid Recovery
· Rubber Removal
• High Performance Winter Vehicle
with 2 blowers and 2 turbines for snow
removal on all airport surfaces. Variant with
8.4 m snow plow and 6 m - wide broom
• Blower variant 1:
1 horizontal turbine for
2 blowers:
· Blower in front of the broom
· Blower between broom and
rear axle
JET BROO
JET BROO
M
M
• Sweeper blower unit KBGA 4.2 / 6.0:
The broom's suspension system does not
require castor wheels and enables continuous
raising and lowering of the broom, with automatic
ground pressure regulation. The broom
adapts itself to the surface's nature and allows
high speed. In bends, inclination sensors keep
the broom in a perfectly horizontal cleaning
position
• High performance clearing
in one run
• Jetbroom as High Performance Vacuum Sweeper
with refuse hopper, broom and 2 suction mouths
JET BROO
M
• Jetbroom as High Performance Winter Vehicle with snow
plow, broom and 1 horizontal turbine + 2 blowers. Variant
compatible with spreader attachment
solid/
liquid
• Spreader attachment:
Illustrated variant: Tank
for liquid thawing agent
+ 2 discs distribution unit
• Variant: High Performance Winter Vehicle
with only 1 blower, located to the rear
• Jetbroom in all-year configuration
with quick assembly system to
switch from summer to winter
operations and vice-versa
liquid solid
• Variant: High Performance Winter Vehicle
with only 1 blower, located in front of the broom.
Variant compatible with spreader attachment
• Blower variant 2:
· Turbine/Blower unit in front
of the broom
· Turbine/Blower unit at the
rear of the vehicle