MIRACAST VIDEO ADAPTER - Belkin

More documents

Recommendations

Info

MIRACAST VIDEO ADAPTER’S INTERFACES Advanced Web Interface The web interface can be accessed from a device that has Wi-Fi. The web interface is only available when the Adapter is in Advanced Settings Mode. You will know whether your Adapter is in Advanced Settings Mode if the TV screen reads “Firmware Update.” To enter Advanced Settings Mode on the Miracast Video Adapter, please follow these steps: 1. Power the Miracast Video Adapter off by unplugging the attached USB cable or turn the TV off if the Adapter is powered by the TV. 2. Press and hold the Multipurpose button located on the side of the Miracast Video Adapter. 3. While still holding the Multipurpose button, plug the USB cable back in and continue to hold it until the Firmware Update page appears. 22
MIRACAST VIDEO ADAPTER’S INTERFACES 4. Once the Firmware Update page appears, use a laptop or desktop with Wi-Fi and connect to a network called ”Wi-Fi-Video-Receiver.” 5. Using a browser, navigate to http://192.168.16.1 23
Page 1 and 2: MIRACAST VIDEO ADAPTER User Manual
Page 3 and 4: INTRODUCTION Thank you for purchasi
Page 5 and 6: INTRODUCTION 1. Placement of your W
Page 7 and 8: OVERVIEW Product Specifications Hos
Page 9 and 10: OVERVIEW Multipurpose Button The on
Page 11 and 12: INSTALLING AND SETTING UP THE ADAPT
Page 23: MIRACAST VIDEO ADAPTER’S INTERFAC
Page 27: MIRACAST VIDEO ADAPTER’S INTERFAC
Page 30 and 31: MIRACAST VIDEO ADAPTER’S INTERFAC
Page 32 and 33: MIRACAST VIDEO ADAPTER’S INTERFAC
Page 34 and 35: TROUBLESHOOTING Video is not displa
Page 36 and 37: INFORMATION FCC Statement DECLARATI
Page 38 and 39: INFORMATION How to get service. To

MIRACAST VIDEO ADAPTER - Belkin

Create successful ePaper yourself

Delete template?

Save as template?