ART 3.0 - Güralp Systems Ltd

More documents

Recommendations

Info

<strong>ART</strong> Also shown in this figure (if the ‘Display metadata’ option is selected in the ‘Options’ window) are the basic earthquake, waveform and station metadata of the selected time-history. Multiple time-histories selected Clicking on this button when multiple time-histories have been selected calculates and plots the drift spectra (e.g. Iwan, 1997) of the currently selected time-histories for the damping level and material type specified in the ‘Options’ window and displays them on the same graph so that they can be easily compared (see below). 3.2.21 Comparisons Clicking on this button opens a new window (see below) that allows the user to compare the observed elastic response spectra of the selected time-histories with predicted median spectra from 21 recent GMPEs (e.g. Douglas, 2003) and three seismic design codes. The GMPEs that can be selected by clicking on the check-boxes are the following: 1. Abrahamson & Silva (1997) (AS97); 50 Issue C
User guide 2. Ambraseys & Douglas (2003) (AD03); 3. Ambraseys et al. (1996) / Ambraseys & Simpson (1996) (AETAL96, AS96); 4. Ambraseys et al. (2005a, b) (AETAL05); 5. Atkinson & Boore (1997) (AB97); 6. Atkinson & Boore (2003) (AB03); 7. Berge-Thierry et al. (2003) (BTETAL03); 8. Bindi et al. (2006) (BETAL06); 9. Boore et al. (1997) (BETAL97); 10. Campbell (1997) (C97); 11. Campbell & Bozorgina (2003a, b, c) (CB03); 12. Crouse (1991) (C91); 13. Kalkan & Gülkan (2004) (KG04); 14. Lussou et al. (2001) (LETAL01); 15. Ozbey et al. (2004) (OETAL04); 16. Sabetta & Pugliese (1996) (SP96); 17. Sadigh et al. (1997) (SETAL97); 18. Spudich et al. (1999) (SETAL99); 19. Toro et al. (1997) (TETAL97); 20. Youngs et al. (1997) (YETAL97); 21. Zonno & Montaldo (2002) (ZM02). Predictions from these GMPEs are only displayed on the comparison graph if the required metadata (e.g. mechanism type) is available for the selected time-histories. In addition, some of the GMPEs are only for horizontal motions and therefore no predictions are displayed if only vertical May 2009 51
Page 1 and 2: ART 3.0 Seismic Analysis and Resear
Page 3 and 4: User guide 5 Software Change Histor
Page 5 and 6: User guide • calculation and plot
Page 7 and 8: 2 Getting Started User guide The ma
Page 9 and 10: User guide Sensor TYPE=modelnumbe
Page 11 and 12: User guide COILCONST=0.02575,0.0177
Page 13 and 14: 3 Using ART User guide The followin
Page 15 and 16: User guide hand list box) click on
Page 17 and 18: User guide spectra of two or more r
Page 19 and 20: User guide lower limit is 0.1s; 37.
Page 21 and 22: User guide Adding or editing earthq
Page 23 and 24: User guide 3.2.5 Filter time-histor
Page 25 and 26: User guide Type of data being expor
Page 27 and 28: User guide whether they are sure th
Page 29 and 30: User guide 8. sustained maximum acc
Page 31 and 32: User guide calculated. The response
Page 33 and 34: User guide 32. average spectral per
Page 35 and 36: User guide Also shown in this figur
Page 37 and 38: User guide Also shown in this figur
Page 39 and 40: User guide 3.2.15 Husid (Arias inte
Page 41 and 42: User guide graphical formats (.bmp,
Page 43 and 44: User guide graphical formats (.bmp,
Page 45 and 46: User guide the currently selected t
Page 47 and 48: User guide 3.2.19 Elastic input ene
Page 49: User guide 3.2.20 Drift spectra Thi
Page 53 and 54: User guide selected, entered the ne
Page 55 and 56: User guide Beaudet, P. R. & Wolfson
Page 57 and 58: User guide on Seismic Hazard Analys
Page 59 and 60: User guide Toro, G.R., Abrahamson,
Page 61 and 62: 5.2 Changes from ART 1 User guide
Page 63: User guide 6 Revision history 2009-

ART 3.0 - Güralp Systems Ltd

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?