5.1 Amplifier Owner's Manual - Harman Kardon

A division of
Hayward, CA.
Designed and Manufactured in the USA.
L
R
L
R
AUX
OUT
OUT
L
R
MAIN
OUT
OUT
OUT
OUT
Manufactured under license from Dolby Laboratories Licensing Corporation. Additionally licensed under Canadian patent number 1,037,877. "Dolby", "Pro Logic" and the
Double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.
Manufactured under license from Lucasfilm Ltd. U.S. patent numbers 5,043,970; 5,189,703; abd 5,222,059. Foreign patents pending. Lucasfilm and THX are registered
trademarks of Lucasfilm Ltd.
Additionally licensed under U.S. patent numbers 5,172,415; 5,263,087; 5,199,075; 5,307,415; 5,280,528; 5,339,363; 5,295,189; 4,932,059; and patents pending.
IN 1 IN 2 IN 3 IN 4 AUX AUX
OUT OUT OUT OUT
FRONT
CENTER
FRONT
MONO
SUB
SURROUNDS
SIDE BACK
STEREO
SUB
L
R
CALIBRATION
MICROPHONE
QUALIFIED SERVICE PERSONNEL.
IR
IN
CITATION BUS
Power Control Connections
The Citation 5.1 amplifier features a built-in system that will automatically turn
on the amplifier when another device in the system is switched on. To activate this
system, the 5.1 must be used in conjunction with a Citation Surround Controller
or Processor, other Citation Power Amplifiers, and other approved devices.
Remote Turn On With a Citation Controller or
External Trigger Control Device
The first connection is to link your amplifier to the controlling device. Connect the
“PWR” Trigger output at the rear of a Citation Processor or an approved control
device to the “Remote DC IN” connection on the rear panel of your 5.1. Make
certain that the controlling device sends a 4.5 VDC to 12 VDC signal whenever it
is turned on. If you are using a Citation 7.0 Controller, be certain to use the
“PWR” control trigger, not one of the numbered programmable trigger outputs.
Citation 7.0 Controller
7.0 AV Controller
IN 1 IN 2 IN 3 IN 4
POWER
SERIAL
NUMBER
AUDIO INPUTS
IN 5 IN 6 IN 7 IN 8 REC A
COMPOSITE VIDEO
1 2 3 4 5 6 7 8
Citation 5.1 Amplifier
REC B
REC A
REC B
AUDIO OUTPUTS
REC A
S – VIDEO
REC B
1 2 PWR
TRIGGERS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS: RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR
WARNING: TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK DO NOT EXPOSE THIS EQUIPMENT TO
RAIN OR MOISTURE. DO NOT REMOVE COVER. NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING TO
120V~ 50/60Hz 50 WATTS
Optional
Accessory
Switch
Control
NORMAL
MANUAL
MODE
TURN ON
BRIDGED
REMOTE
CH 1 INPUT
MODE
CH 2 INPUT TURN ON
(BRIDGED INPUT) (NOT USED IN
BRIDGED MODE)
+ –
+
BRIDGED +
OFF
ON
DC DC
IN OUT
REMOTE
NORMAL
MODE
BRIDGED
CH 3 INPUT
MODE
CH 4 INPUT
(BRIDGED INPUT) (NOT USED IN
BRIDGED MODE)
+ –
+
BRIDGED +
AC/DC
Converter
–
BRIDGED
–
–
BRIDGED
–
CH 1 OUTPUT
CH 2 OUTPUT
CH 3 OUTPUT
CH 4 OUTPUT
Optional Remote Trigger Devices
Citation 5.1 Amplifier
NORMAL
MANUAL
MODE
TURN ON
REMOTE
CH 1 INPUT BRIDGED CH 2 INPUT TURN ON
(BRIDGED INPUT) MODE (NOT USED IN
BRIDGED MODE)
+ –
+
BRIDGED +
–
–
BRIDGED
CH 1 OUTPUT CH 2 OUTPUT
OFF
ON
DC DC
IN OUT
REMOTE
NORMAL
MODE
BRIDGED
CH 3 INPUT
MODE
CH 4 INPUT
(BRIDGED INPUT) (NOT USED IN
BRIDGED MODE)
+ –
+
BRIDGED +
–
–
BRIDGED
CH 3 OUTPUT CH 4 OUTPUT
MANUAL
TURN ON
REMOTE
TURN ON
OFF
ON
DC
IN
DC
OUT
REMOTE
Citation 5.1 Amplifier
NORMAL
MANUAL
MODE
TURN ON
BRIDGED
REMOTE
CH 1 INPUT
MODE
CH 2 INPUT TURN ON
(BRIDGED INPUT) (NOT USED IN
BRIDGED MODE)
OFF
ON
DC DC
IN OUT
REMOTE
NORMAL
MODE
BRIDGED
CH 3 INPUT
MODE
CH 4 INPUT
(BRIDGED INPUT) (NOT USED IN
BRIDGED MODE)
Figure 1a
Exploded View of Critical
Rear Panel Area
+
+ –
BRIDGED
+
+
+ –
BRIDGED
+
–
BRIDGED
–
–
BRIDGED
–
CH 1 OUTPUT
CH 2 OUTPUT
CH 3 OUTPUT
CH 4 OUTPUT
Figure 1 Remote Turn On Connections
9