(CIVIL, INTERIOR, ELECTRICAL & ALLIED WORKS) - Imimg
(CIVIL, INTERIOR, ELECTRICAL & ALLIED WORKS) - Imimg
(CIVIL, INTERIOR, ELECTRICAL & ALLIED WORKS) - Imimg
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
48<br />
or equivalent)” or equivalent to be supplied. Complete with all hardware’s and workmanship.<br />
Both side of the door shall be finished in 1mm thk laminate fixed. Item to include all<br />
hardware such as handle (s.s finish with locking arrangement-Godrej make). Cost should<br />
also include door closures with door frame of 50x 75mm of approved wooden section with<br />
melamine polish Complete. Frosted or plain glass to be used where ever asked by the<br />
architect.<br />
3) Door for Main Entry<br />
Providing & fixing Aluminum colour anodised glazed shutters (framed), door frame and fixed<br />
panels for front entrance door as per drawing, confirming to IS 1949, made out of anodized<br />
Aluminum sections shall be of 1.5 mm thickness. The glass shall be fixed in EPDM rubber &<br />
Door shall have good quality concealed type locking arrangement & Handle with same<br />
colour anodized. Aluminum section, shall have an aluminum color anodizing of 15 microns<br />
thickness in matt finish. The aluminum section shall be of good quality JINDAL or equivalent<br />
standard sections, and 12mm thick toughened Modi/Saint Goban floated glass for panels.<br />
The rate includes cost of all material & labour and includes cost of floor spring and complete<br />
with all material, labour, tools, tackles, as / the instructions of EIC.<br />
L) Writing desk<br />
Writing desk. Providing and fixing on site writing desk made in 12mm clear glass with edge<br />
crystal polish supported on panelling behind with 18mm double ply finished with 1.0mm<br />
laminate as instructed. The front shall have 8mm thk glass fixed with S.S studs and caps for<br />
holding slips/challans.<br />
M) Aluminium composite paneling<br />
Providing and fixing 3mm thk exterior grade aluminum composite panel of size as<br />
shown in drawing on aluminium sections of 2"x 1" with necessary other sections and<br />
to be completed in all respecst with necessury fittings.The aluminium panel shall be of<br />
good quality EUROBOND, ALUDECOR or equivalent make.<br />
N ) Ply ceiling<br />
P & M Ply box ceiling above entrance to hide rolling shutter with Provision of<br />
openable trap door for servicing of rolling shutter finished with laminate as/<br />
selection, handle , hinges, lock etc com.<br />
O) Renovation of existing table.<br />
Renovation of table including new laminate, addition of new design, repairing<br />
or replacement of hardware i.e. handle, lock, channel if required, painting /<br />
polishing from inside etc complete<br />
P) CHAIRS<br />
1)STAFF CHAIRS<br />
Executive push back revolving chair, a truly life long product with out standing Functionality,<br />
waterfall contour of seat front for stress free seating . Upholstery with PU Molded Cushion<br />
at seat & back (A specially body designed injection molded cell, anatomically contoured<br />
molded thermoplast armrest, push back system & body wait adjustment with lock & unlock<br />
pneumatic system for height and handle adjustment, injection molded six legs glass filled<br />
nylon base with smooth rolling twin wheel castors.<br />
Tender Document UBI Deva branch
Change language