GlowFit – a new tool for thermoluminescence glow curves doconvo

5.1 The adjustment
The graphical interface enables also to manipulate the glow peaks before and after the fitting,
as a manual fit adjustment. This is very helpful in case the minimization method failed. In
order to adjust a peak parameter user should mark the appropriate radiobutton (Figure 8) and
move the slide control (left(-) or right(+)) to change this parameter value. The step of
movement is changeable as shown in Figure 8. Another possibility to adjust the peak
parameters is to type the values straightforward into The peaks parameters table and confirm
by double-pressing Enter key (Figure 4).
Step of
movement
6. Closing
Figure 8. The manual adjustment of the peak parameters.
The application can be closed by selecting Close from the main menu.
Figure 9. The program closing.
A6