C161PI AA / BA-H Step - Infineon
C161PI AA / BA-H Step - Infineon
C161PI AA / BA-H Step - Infineon
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Deviations from Electrical- and Timing Specification:<br />
The following table lists the deviations of the DC/AC characteristics from the specification in the<br />
<strong>C161PI</strong> Data Sheet 1999-07:<br />
Problem Parameter Symbol Limit Values Unit Test<br />
short name min. max. Condition<br />
AC.t34.n2<br />
CLKOUT rising edge to<br />
ALE falling edge<br />
t 34<br />
-2 + t A<br />
instead of<br />
- ns Standard Supply<br />
Voltage<br />
AC.t34.n10<br />
CLKOUT rising edge to<br />
ALE falling edge<br />
t 34<br />
0 + t A<br />
-10 + t A<br />
instead of<br />
0 + t A<br />
8 + t A<br />
ns Reduced Supply<br />
Voltage<br />
AC.t33.10 CLKOUT fall time t 33<br />
- 10<br />
instead of<br />
4 (8)<br />
DC.VDDRM.1 Reduced digital supply<br />
voltage<br />
V DD<br />
3.15<br />
instead of<br />
3.0<br />
ns<br />
Standard<br />
(Reduced)<br />
Supply Voltage<br />
3.6 V Devices with<br />
date code ≥<br />
0141<br />
Notes:<br />
1) During reset and adapt mode, the internal pull-ups on P6.[4:0] are active, independent whether<br />
the respective pins are used for CS# function after reset or not.<br />
Microcontroller Division Errata Sheet, <strong>C161PI</strong>-L(25)M/F(3V), (ES-) <strong>AA</strong>, <strong>BA</strong>-H 1.6, es/Mh - 14 of 22 -