04.02.2014 Views

PICOe-9452 User Manual

PICOe-9452 User Manual

PICOe-9452 User Manual

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>PICOe</strong>-<strong>9452</strong> Half-size CPU Card<br />

5.3.2 Cooling Kit CF-479B-RS Installation<br />

Figure 5-3: IEI CF-479B-RS Cooling Kit<br />

An IEI Socket M CPU cooling kit can be purchased separately. The cooling kit comprises a<br />

CPU heat sink and a cooling fan.<br />

WARNING:<br />

Do not wipe off (accidentally or otherwise) the pre-sprayed layer of<br />

thermal paste on the bottom of the [Fan model#] heat sink. The thermal<br />

paste between the CPU and the heat sink is important for optimum<br />

heat dissipation.<br />

To install the CF-479B-RS cooling kit, please follow the steps below.<br />

Step 1: Place the cooling kit onto the CPU. Make sure the CPU cooling fan cable<br />

can be properly routed when the cooling kit is installed.<br />

Step 2: Properly align the cooling kit. Make sure its four spring screw fasteners can<br />

pass through the pre-drilled holes on the PCB.<br />

Step 3: Secure the cooling kit. From the solder side of the PCB, align the support<br />

bracket to the screw threads on heat sink that were inserted through the PCB<br />

holes. (See Figure 5-4)<br />

Page 84

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!