04.02.2014 Views

PICOe-9452 User Manual

PICOe-9452 User Manual

PICOe-9452 User Manual

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

<strong>PICOe</strong>-<strong>9452</strong> Half-size CPU Card<br />

Figure 5-7: CF Card Installation<br />

5.4 Jumper Settings<br />

NOTE:<br />

A jumper is a metal bridge used to close an<br />

electrical circuit. It consists of two or three metal<br />

pins and a small metal clip (often protected by a<br />

plastic cover) that slides over the pins to connect<br />

them. To CLOSE/SHORT a jumper means<br />

connecting the pins of the jumper with the plastic<br />

clip and to OPEN a jumper means removing the<br />

plastic clip from a jumper.<br />

Figure 5-8: Jumper Locations<br />

Before the <strong>PICOe</strong>-<strong>9452</strong> is installed in the system, the jumpers must be set in accordance<br />

with the desired configuration. The jumpers on the <strong>PICOe</strong>-<strong>9452</strong> are listed in Table 5-1.<br />

Page 88

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!