PICOe-9452 User Manual

PICOe-9452 Half-size CPU Card
o When working with the PICOe-9452, make sure that it is disconnected
from all power supplies and that no electricity is being fed into the system.
Before and during the installation of the PICOe-9452 DO NOT:
• Remove any of the stickers on the PCB board. These stickers are required for
warranty validation.
• Use the product before verifying all the cables and power connectors are
properly connected.
• Allow screws to come in contact with the PCB circuit, connector pins, or its
components.
5.2.2 Installation Checklist
The following checklist is provided to ensure the PICOe-9452 is properly installed.
• All the items in the packing list are present
• The CPU is installed
• The CPU cooling kit is properly installed
• A compatible memory module is properly inserted into the slot
• The CF Type I or CF Type II card is properly installed into the CF socket
• The jumpers have been properly configured
• The PICOe-9452 is inserted into a chassis with adequate ventilation
• The correct power supply is being used
• The following devices are properly connected
o IDE device
o SATA drives
o Keyboard and mouse cable
o Audio kit
o Power supply
o USB cable
o Serial port cable
o Parallel port cable
• The following external peripheral devices are properly connected to the
chassis:
o VGA screen
Page 80