(Manual) OLYMPUS E-410 - Sensor Cleaning

e.g.) When BKT is set to [3F 1.0EV]
-1.0EV
Compensation value: 0.3, 0.7 or 1.0
Number of frames: 3
±0
+1.0EV
Menu
3Shooting functions k Various shooting functions
MENU[X][AE BKT]
[OFF]/[3F 0.3EV]/[3F 0.7EV]/[3F 1.0EV]
Start shooting.
• The shooting method varies depending on the setting of
single-frame or sequential shooting. g “Sequential
shooting” (P. 43)
Single-frame shooting
Each time the shutter button is pressed fully, a picture is
taken at a different exposure.
• The setting for the next shot is displayed in the viewfinder.
Viewfinder
Sequential shooting
Hold down the shutter button until the selected number of
frames are taken. The camera shoots each frame at a different exposure.
• Releasing the shutter button stops auto bracketing shooting. When it stops, [BKT] on the control
panel is displayed in blue.
How AE bracketing compensates exposure in each exposure mode
Depending on the selected exposure mode, exposure is compensated in the following way:
P mode : Aperture value and shutter speed
A mode : Shutter speed
S mode : Aperture value
M mode : Shutter speed
TIPS
CANCEL
SELECT
To apply AE bracketing to the exposure value you have compensated:
Compensate the exposure value, then use the AE bracketing feature. AE bracketing is applied to
the exposure value you have compensated.
GO
Exposure
compensation
value of the
next shooting
frame
x Notes
• During sequential shooting, if the battery check blinks due to low battery, the camera stops
shooting and starts saving the pictures you have taken on the card. The camera may not save
all of the pictures depending on how much battery power remains.
36 EN