(Manual) OLYMPUS E-410 - Sensor Cleaning
(Manual) OLYMPUS E-410 - Sensor Cleaning
(Manual) OLYMPUS E-410 - Sensor Cleaning
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Selecting the record mode<br />
You can select a record mode in which to take pictures. Choose the record mode that’s best<br />
for your purpose (printing, editing on a PC, website editing, etc.). For details about record<br />
modes and number of pixels, refer to the table on “List of record modes” (g P. 107).<br />
Types of record modes<br />
Record mode allows you to select a combination of pixel count and compression rate for the<br />
images you record. An image consists of pixels (dots). When you enlarge an image with a low<br />
pixel count, it will be displayed as a mosaic. If an image has a high pixel count, the file size<br />
(amount of data) will be larger and the number of storable still pictures will be lower. The<br />
higher the compression, the smaller the file size. However, the image will have less clarity<br />
when played back.<br />
Exposure, image and color<br />
3Shooting functions k Exposure, image and color<br />
Number of pixels increases<br />
Application<br />
Select for the<br />
print size<br />
For smallsized<br />
print and<br />
website<br />
Number of<br />
pixels<br />
Low<br />
compression<br />
1/2.7<br />
Quality (Compression)<br />
High<br />
compression<br />
1/4<br />
Image becomes clearer<br />
High<br />
compression<br />
1/8<br />
High<br />
compression<br />
1/12<br />
3648 × 2736 SHQ k HQ k<br />
3200 × 2400<br />
2560 × 1920<br />
1600 × 1200<br />
1280 × 960<br />
1024 × 768 SQ<br />
640 × 480<br />
Image with a high pixel count<br />
Image with a low pixel count<br />
RAW data<br />
This is unprocessed data that has not undergone changes in white balance, sharpness,<br />
contrast or color. To display as an image on the computer, use <strong>OLYMPUS</strong> Master. RAW data<br />
cannot be displayed on a different camera or by using common software, and it cannot be<br />
selected for print reservation.<br />
It is possible to edit images taken with the record mode set to RAW data using this camera.<br />
g “Editing still images” (P. 65)<br />
50 EN