View PDF (1.7mb) - WF Senate

LIGHTING
Fluorescent Lighting
EMS
hazardous area products
BI-PIN FLUORESCENT LUMINAIRES
II 2 GD EEx ed IIC T4 or T5, Zone 1, 2 (Gases), Zone 21 and 22 (Dusts)
■ Instant start. Power factor
≥ 0.95 2 channel ballast
■ Pre-impregnated fibre glass
reinforced polyester body
■ Polycarbonate diffuser hinged to body
■ Polycarbonate multi-parabolic hinged reflector
■ Degree of Protection - IP66/67
■ High temperature internal wiring
■ Power supply to the unit cut off by positive
safety switch which operates when diffuser
is opened, for replacing tubes with mains
power switched on
■ Pole mounting version available for
mounting on pole or Ø42mm tubular
wall-mounting support
■ Suitable for use with armoured cables
■ Supplied with multi-tapped ballasts
Part No. Description
0965 35 1 x 18W, 220/240V
0965 38 2 x 18W, 220/240V
0965 43 1 x 36W, 220/240V
0965 45 2 x 36W, 220/240V
0963 42 1 x 58W, 220/240V
0963 43 2 x 58W, 220/240V
EMERGENCY BI-PIN FLUORESCENT LUMINAIRES
II 2 GD EEx edm IIC T4 or T5, Zone 1, 2 (Gases), Zone 21 and 22 (Dusts)
Part No. Description
0963 40 2 x 18W, 220/240V
0963 41 2 x 36W, 220/240V
0963 44 2 x 58W, 220/240V
■ Common power supply circuit to provide
both normal lighting and emergency lighting
■ Instant start. Power factor ≥ 0.95
■ Pre-impregnated fibre glass reinforced polyester body
■ Polycarbonate diffuser hinged to body
■ Polycarbonate multi-parabolic hinged reflector
■ Degree of Protection - IP66/67
■ High temperature internal wiring
■ Suitable for use with armoured cables
■ Supplied with multi-tapped ballasts
14
Lamps not supplied unless otherwise stated. Call for details.