Orchard Dresser instructions - Mamas & Papas

More documents

Recommendations

Info

STEP 21 Slot the runners on the drawer sides into the carcass runners and push inwards. STEP 22 Important: If the drawer fronts are not correctly aligned the screws in the inside of the drawer fronts and the handle screws must be loosened. Once loose (never fully remove the screws), the angle of the drawer front can be raised or lowered into the correct position. Once the drawer fronts are correctly aligned all the screws must be fully tightened. -14- Orchard dresser V3 (print).indd 14 16/9/08 13:01:53
WALL STRAP INFORMATION The wall strap is only intended to be used with the Mamas and Papas product that it is supplied with. Never attempt to modify or change the wall attachment strap in any way. Never use any other fittings for attaching the strap to your furniture than those supplied. Never use the screw provided to attach the strap to the wall. No wall attachment fittings are supplied. This is because the type of fittings required to attach the strap to the chosen wall is determined by the walls composition. If you are in any doubt about the correct type of fittings to use, consult a professional before attempting to attach the strap to the wall. The wall strap must not be used to replace any other fitting supplied with your piece of furniture. Furniture falling over is generally due to the surface the furniture is placed on. A warped floor or wall-to-wall carpeting will enable the furniture to rock, so greatly increasing the potential for the furniture to fall. If the furniture is placed on a flat level wood or tiled floor the risk is reduced, but we still recommend the wall strap is fitted. INSTRUCTIONS FOR SAFE USE & maintenance • WARNING: DO NOT LEAVE YOUR CHILD UNATTENDED. The safety of your child is your responsibility. • Before use, ensure the dresser is on a stable, level surface. • Do not allow children to climb on the dresser. • Never use the dresser if any parts are broken or missing. • Never pivot or drag the dresser on its feet, the dresser must always be lifted by at least two people when moved. • Do not place the dresser in the near vicinity of open fires or other sources of strong heat, such as electric or gas fires. • Always leave the dresser clean and dry. Wipe away any spillage straight away. The dresser can be cleaned with a damp cloth. Never use abrasive, bleach or strong detergents. • Check regularly that all fittings and screws are correctly tightened and are not damaged. Loose screws can pinch parts of the body and clothing resulting in the risk of strangulation. • A changing mattress is not supplied with this product. We recommend that you only use a Mamas & Papas changing mattress with your dresser. Lay the changing mattress on the changing surface, within the retaining rails. • Regularly check that all fittings and components of the dresser are fully tightened and in working order. If any parts have become worn or damaged then do not use the dresser, seek advice from your retailer or by calling our Customer Care on: +44 (0)845 268 2000. Due to constant updating and improvements, some components may occasionally differ slightly from the diagrams shown in these instructions. We reserve the right to change the specifications of any product without prior notice. After sales Service: If you need assistance, spare parts or you are unhappy with any aspect of the goods please contact Customer Care on: +44(0)845 268 2000, or e-mail us at: customer.care@mamasandpapas.com. Visit our website at www.mamasandpapas.com for the latest product information. -15- Orchard dresser V3 (print).indd 15 16/9/08 13:01:53
Page 1 and 2: instructions orchard dresser FR041D
Page 3 and 4: A x 2 Fittings B x 2 Cam studs C x
Page 5 and 6: STEP 3 The top rails can be used wi
Page 7 and 8: F STEP 7 Slot the assembled divider
Page 9 and 10: STEP 11 Insert four long screws (d)
Page 11 and 12: STEP 15 Slot the assembled dresser
Page 13: 21 22 STEP 19 Attach the six drawer

Orchard Dresser instructions - Mamas & Papas

Create successful ePaper yourself

Delete template?

Save as template?