More choice for wall units: Folding, lift-up and ... - Kesseböhmer

HUWILIFT E-STRATO – FAQ & TECHNICAL DATA
FAQ
Frequently asked questions
What supply voltage do the E-fittings need?
With input voltage between 100-240 V, the E-fittings can be used anywhere in the world.
Note: The device adapts to voltage peaks.
What happens if the power supply is interrupted?
If this happens, the doors can be opened by hand. When power is restored, system operation is resumed by simply
pressing the remote control. The first opening and closing movements will again be learning movements to reprogram
the final open and shut positions respectively.
Must the remote control always be attached to the cupboard with electric operation?
No, it must merely be close to the cupboard.
Is there any risk of injury when the doors are operated electrically?
No, because the motor switches off immediately if an obstacle is encountered during an opening or closing movement.
Does the system need regular adjusting or oiling?
No, E-fittings are maintenance free.
What should I do if there’s an operating problem?
First consult the troubleshooting section of the operating instructions to check whether you can identify the cause of the
problem and fix it. Only if you can’t get the system operating again should you contact your furniture supplier or manufacturer
who will take all the necessary steps.
Technical data
Device name, control unit
Device name, remote control
Supply voltage
Input power
Output power
Ambient operating temperature
Overvoltage category
Protection class
Contamination level
Radio frequency
Transmitter power
Battery
Standby power
Operating note
DSB 899 A
DSB 899 C
100-240 V~/ 50-60 Hz
≤ 50 W
≤ 50 W
0-40°C / 32-104°F
II
2
IP 2
EU 869.00 MHz / US 915.00 MHz
40 μW
Lithium button cell CR2032
0.6 W
After 2 minutes continuous operation – 8 minutes non-operational
FOLDING, LIFT-UP AND PARALLEL LIFT SYSTEMS | 31