Digital Torque Transducer Data Sheet

More documents

Recommendations

Info

Stator dimensions (in mm; 1 mm=0.03937 inches) min. 43 Reserved additional space for connected status min. 10 *) Reserved additional space for mounting and dismounting approx. j 20 View Z 180 150 M6 Maximum thread reach 10 +1 approx. 100 Reserved additional space for connection cable with male connector Female cable connector in 4 angular positions adjustable Accessories female cable connector 7- alternatively 8-pin 90° cable run approx. 54 UNF 1/4” Maximum thread reach 0.4” +0.02” 114.3 = 4 1/2” *) Min. 14 mm with 5 kN⋅m and 10 kN⋅m Side view Y b Air gap area: Radial = 10 mm Axial = b 2 (see page 7) Side view X X 24 28 45 66 H2 H1 Y 62 10 8 28 (28) 6.5 56 Stator center Z Top view Dimensions without tolerances per DIN ISO 2768-mK Only with speed measuring system and speed measuring system with reference mark Measuring range Dimensions in mm (NVm) b ∅D H1 H2 500 1 k 91.5 143 280 204.5 2 k 3 k 109.5 179 310 222.5 5 k 123.5 207 333 239.5 10 k 144.5 249 369 263.5 HBM 8 B1941-4.0 en
Stator dimensions 500 N⋅m ... 1 kN⋅m with protection against contact (in mm) (Cover plate) 58 (Protection against contact, complete) 1 1 56 (Protection against contact) (Cover plate) A ∅ 139 1 (58) 1 (56) 12 32 204.5 99.3 98 317 103.5 102.5 ∅ 223 +2 ∅ 205 ∅ 196 ∅ 187 −2 View without protection against contact (half) Z Z Z ∅ 11 Z 90 (Stop screw) View A Connection apertures Z ∅ 6.6 40 (56) Protection against contact ∅ 11 98 ∅ 6.6 43 Connection aperture with spot face View without cover plate B1941-4.0 en 9 HBM
Page 1 and 2: T12 Digital Torque Transducer Data
Page 3 and 4: Specifications (Continued) N⋅m 50
Page 5 and 6: Specifications (Continued) N⋅m 50
Page 7: Rotor dimensions (in mm; 1 mm=0.039
Page 11 and 12: Dimensions cover plates (in mm) Dis
Page 13 and 14: Radial and axial run-out tolerances
Page 15 and 16: Accessories, to be ordered separate

Digital Torque Transducer Data Sheet

Create successful ePaper yourself

Delete template?

Save as template?