Torque transducer Data sheet

More documents

Recommendations

Info

Specifications Type Accuracy class 0.5 <strong>Torque</strong> measuring system Nominal (rated) torque M nom N⋅m 5 10 20 50 100 200 500 kN⋅m 1 T22 Nominal (rated) sensitivity (span between torque = zero and nominal (rated) torque M nom ) Voltage output Current output Sensitivity tolerance (deviation of the actual output quantity at M nom from the nominal (rated) sensitivity) Voltage output Current output Output signal at torque = zero Voltage output Current output Nominal (rated) output signal Voltage output at positive nominal (rated) torque at negative nominal (rated) torque Current output at positive nominal (rated) torque at negative nominal (rated) torque V mA % % V mA V V mA mA 5 8 0.2 0.2 00.2 100.2 Load resistance (Voltage output) MΩ >1 Burden (current output) with U B = 12 V with U B = 24 V Longterm drift over 48h Voltage output Current output Cut−off frequency (−3 dB) (volt. output / current output) kHz 1 Ω Ω mV mA +5 −5 +18 +2 250 500
Specifications (continued) Nominal (rated) torque M nom N⋅m 5 10 20 50 100 200 500 kN⋅m 1 General data EMC 2) Immunity from interference (DIN EN 61326−1 / EN 61000−6) Enclosure HF line interference 150 kHZ − 80 MHz (AM) ESD (electrostatic discharge) Enclosure Electromagnetic field 80 MHz − 1000 MHz (AM) 1400 MHz − 2700 MHz (AM) V kV kV V/m V/m 10 / A Air 8 / A Contact 4 / A 10 / A 3 / A Lines − Connecting cable Burst (fast transients) kV 2 / A Emission (EME) (EN 61326-1 / EN 55011) RFI voltage (interference voltage at DC mains connection) RFI field strength − − Class B (150 kHz − 30 MHz) Class B (30 MHz − 1000 MHz) (Electromagnetic RFI field strength) Degree of protection per EN 60529 IP 40 Nominal (rated) temperature range °C [°F] +5...+45 [+41...+113] Operating temperature range °C [°F] 0...+60 [+32...+140] Storage temperature range °C [°F] −5...+70 [+23...+158] Impact resistance, test severity level per DIN IEC 68; Part 2-27; IEC 68-2-29-1987 number n 1000 duration ms 3 acceleration (halfsine) m/s 2 650 Vibration resistance, test severity level per DIN IEC 68, Part 2-6: IEC 68-2-6-1982 frequency range Hz 5 ... 65 duration h 1.5 acceleration (amplitude) m/s 2 50 Nominal (rated) rotational speed n nom min -1 16 000 12 000 9 000 Load limits 3) Limit torque, related to M nom % 200 5) Breaking torque, related to M nom % > 280 Longitudinal limit force kN 0.9 0.9 0.9 1.6 1.6 1.6 4 4 Lateral limit force N 25 45 90 210 420 850 1400 2800 Bending limit moment N⋅m 0.5 0.9 1.9 5.5 11 22 54 109 Oscillation width per DIN 50100 (peak-topeak) 4) % 80 2) Test severity / criterion: Industrial environment, cable length 30 m. Application not outside buildings. 3) Each type of irregular stress (bending moment, lateral or longitudinal force, exceeding nominal (rated) torque) can only be permitted up to its specified static load limit provided none of the others can occur at the same time. If this condition is not met, the limit values must be reduced. If 30% of the bending limit moment and lateral limit force occur at the same time, only 40% of the longitudinal limit force is permissible and the nominal (rated) torque must not be exceeded. The permissible bending moments, longitudinal forces and lateral forces can affect the measurement result by approx. 1 % of the nominal (rated) torque. 4) The nominal (rated) torque must not be exceeded. 5) Please adhere to the maximum torque (T max ) of the couplings. B2318-2.0 en 3 HBM
Page 1: T22 Torque transducer Data sheet Sp
Page 5 and 6: Dimensions of the T22 a b 63 ∅17.
Page 7 and 8: Specifications Measuring range Torq

Torque transducer Data sheet

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?