Catalogue of Luminaires 57

·
·
·
·
·
·
·
·
·
·
80
190
250
300
Recessed wall and ceiling luminaires for
• low voltage halogen lamps QT 9-tr · 12 V · without transformer
• incandescent lamps D 45 - E 14 and A 60 - E 27
• fluorescent lamps TC-T · low-loss ballast
• fluorescent lamps TC-TELI · electronic ballast
Protection class IP 65
Crystal glass with light-diffusing texture, inside white
Die-cast aluminium luminaire housing
Frame ring optionally
• stainless steel
• die-cast aluminium with white enamel RAL 9010
with 2 cable entries for through-wiring
8111 · 7959 1 cable entry
The luminaires for fluorescent lamps are fitted with the required ballasts.
When preparing the recessed opening, it may be practical to use an installation
housing. Aluminium installation housings with 2 cable entries are given in the table.
If luminaires are installed in brickwork or concrete walls and ceilings which are then
plastered, it is also appropriate to use the fixing frames listed in the table.
Installation housings and fixing frames are accessories and must be ordered separately.
· A ·
·
C
·
· B · B · C = recessed dimensions
A · B ·
stainless
steel white lamp lumen A B C
8111 7959 1 QT 9-tr 10 W 130 80 90 71
8113 7961 1 D 45 40 W 400 190 110 175
8164 8162 1 A 60 60 W 710 250 110 227
8311 8309 1 A 60 100 W 1360 300 115 280
8115 7963 1 TC-T 13 W 900 190 110 175
8165 8163 1 TC-T 26 W 1800 250 110 227
8312 8310 1 TC-TELI 26 · 32 W 2400 300 115 280
installation
fixing
housing A B frame
5063 80 107 5074
5067 185 135 5075
5069 245 135 5076
5078 295 135 5079
5067 185 135 5075
5069 245 135 5076
5078 295 135 5079
15