Veröffentlichungen 2012 - Institut für Textiltechnik - RWTH Aachen ...

Veröffentlichungen 2012 

1 Abel, P.; Pico, D.; Nguyen, L.; Gries, T. 

Reinforcement properties of recovered glass fibres 

In: Innovative textile for high future demands : book of proceedings / 12th World Textile 

Conference AUTEX 2012, 13th to 15th June 2012, Zadar. - Zagreb : Faculty of Textile 

Technology, University of Zagreb, 2012, Vol. II: S. 1595-1600 

2 Alagirusamy, R.; Eichhoff, J.; Gries, T.; Jockenhövel, S. 

Coating of conductive yarns for electro-textile applications 

The Journal of the Textile Institute online published 17 Sept 2012 

DOI:10.1080/00405000.2012.719295 

3 Ali, R.; Seide, G.; Gries, T. 

Basics for the use of induction heating in the production of fibre reinforced composite 

In: Dörfel, Annett (Ed.): Proceedings of the 6th Aachen-Dresden International Textile 

Conference, Dresden, November 29-30, 2012. - Dresden : Institute of Textile Machinery and 

High Performance Material Technology (ITM), TU Dresden, 2012, Datei: p80_ali.pdf 

4 Amzaleg, E.; Peled, A.; Janetzko, S.; Gries, T. 

Bending behavior of 3D fabric reinforced cementitious composites 

In: Barros, Joaquim … (Eds.): Eigth RILEM International Symposium on Fibre Reinforced 

Concrete (BEFIB2012) : Challenges and Opportunities, Guimaraes, Portugal, 19-21 September 

2012. Bayeux : RILEM Publications, 2012, Datei: 02_011_E.Amalzeg_et_al_Paper.pdf 

5 Aslan, B.; Ramaswamy, S.; Raina, M.; Gries, T. 

Bio-composites : processing of thermoplastic biopolymers and industrial natural fibres from 

staple fibre blends up to fabric for composite applications 

Tekstil ve Mühendis (Journal of Textiles and Engineer) 19 (2012), H. 85, S. 47-51 

DOI: 10.7216/130075992012198510 

6 Bach, C.; Cornelissen, C.; Kleinsteinberg, K.; Frese, J.; Gesché, V.; Gries, T.; Jockenhövel, S. 

Pulmostent : treating lung cancer with textiles and living tissue 



High Performance Material Technology (ITM), TU Dresden, 2012, Datei: p81_bach.pdf 

7 Baur, P. vom; Laarakker, G.; Pixberg, A.; Wendland, B.; Gries, T. 

Development of a 3D woven profile for the reinforcement of a shell structure in an aerospace 

application 



High Performance Material Technology (ITM), TU Dresden, 2012, Datei: lecture_baur.pdf 

8 Beckers, M.; Steinmann, W.; Vestweber, N.; Seide, G.; Gries, T. 

Novel melt-spun optical fibers for lighting applications 

MSE 2012 Materials Science Engineering, Darmstadt 25.-27.09.2012, URL: 

http://webdb.dgm.de/dgm_lit/prg/FMPro?-db=w_review&-recID=32938&- 

format=prog_kurzfassung.htm&-lay=Standard&-find 

9 Beckers, M.; Vestweber, N.; Steinmann, W.; Glauß, B.; Künne, M.; Seide, G.; Gries, T. 

Optical characterization of melt-spun polymeric fibers 



Technology, University of Zagreb, 2012, Vol. I: S. 159-162 

10 Beckers, M.; Vestweber, N.; Steinmann, W.; Vad, T.; Gauß, B.; Künne, M.; Seide, G.; Gries, T. 

Optical test stand for measuring purposes of light guide properties of optical fibers 

Chemical Fibers International 62 (2012), H. 1, S. 43-45 

1/20


11 Beckers, M.; Vestweber, N.; Wortberg, G.; Steinmann, W.; Glauß, B.; Künne, M.; Seide, G.; 

Gries, T. 

Optical analysis of melt spun monofilaments 



High Performance Material Technology (ITM), TU Dresden, 2012, Datei: p78_beckers.pdf 

12 Borinski, M.; Flege, C.; Schreiber, F.; Krott, N.; Gries, T.; Liehn, E.; Blindt, R.; Marx, N.; Vogt, 

F. 

Introduction of a high-throughput double-stent animal model for the evaluation of biodegradable 

vascular stents 

Journal of Biomedical Materials Research Part B: Applied Biomaterials 100B (2012), H. 8, S. 

2023-2028 

DOI: 10.1002/jbm.b.32810 

13 Bosowski, P.; Gloy, Y.-S.; Jockenhövel, S.; Gries, T. 

Kontinuierliche Fertigung von 3D-Smart Textiles-Bandgewebe am Beispiel funktionalisierter 

Evakuierungsmatten 

Melliand Textilberichte 93 (2012), H. 4, S. 187-189 

14 Bosowski, P.; Gries, T. 

Electrostimulation with knee sleeves for rehabilitation 

In: Uludağ Ihracatçi Birlikleri Yayinlari (Hrsg.): UTIB Türkiye Tekstil ve Konksiyon Sektöründe : 

IV. Uluslararasi Ar-Ge Proje Pazari = UTIB Turkey Textile and Clothing Industry : IV. 

International R&D Project Brokerage Event, 02-03 Şubat / February 2012. - Istanbul : Maya 

Basim, 2012, S. 213-214 

15 Bosowski, P.; Jockenhövel, S.; Gries, T. 

Textile based interface device designed to meet specific fire-fighters' requirements 

Bartkowiak, Grażyna … (Eds): Innovations in clothing technology and measurement 

techniques. - Warsaw : Central Institute for Labour Protection - National Research Institute, 

2012, S. 139-145 

16 Brecher, C.; Emonts, M.; Ozolin, B.; Schnabel, A.; Greb, C. 

Preform manufacturing and handling for the mass production of composites = 

Preformherstellung und Handhabung für die Serienfertigung von 

Faserverbundstrukturbauteilen 



High Performance Material Technology (ITM), TU Dresden, 2012, Datei: lecture_ozolin.pdf 

17 Cetin, M.; Gries, T. 

Handling technology for textile series production 





18 Cetin, M.; Quadflieg, T.; Klingele, J.; Greb, C.; Gries, T. 

Innovative use of composites with lighting function 



High Performance Material Technology (ITM), TU Dresden, 2012, Datei: p77_cetin.pdf 

19 Christ, M.; Sköck-Hartmann, B.; Krieger, H.; Gries, T.; Herrmann, A. 

Analysing the draping behaviour of glass fiber fabrics 

Gries, Thomas … (Eds.): International Glass Fiber Symposia / Proceedings of the First 

International Symposium on Glass Fiber, 16-19 October 2012, NRW, Aachen, Germany. - 

Aachen, 2012, S. 80-84 

2/20


20 Christ, M.; Sköck-Hartmann, B.; Krieger, H.; Hoffmeister, C.; Herrmann, A.S.; Gries, T. 

Prüfverfahren und Methoden zur Charakterisierung der Drapierbarkeit von technischen 

Textilien 

In: Förderverein Cetex Chemnitzer Textilmaschinenentwicklung e.V. ; Technische Universität, 

Chemnitz Fakultät für Maschinenbau, Institut für Strukturleichtbau (Hrsg.): Tagungsband zur 

13. Chemnitzer Textiltechnik-Tagung : Wertschöpfungspotenzial Textiltechnik, 14. und 15. 

März 2012. - Chemnitz : Förderverein Cetex Chemnitzer Textilmaschinenentwicklung ; 

Technische Universität, Chemnitz Fakultät für Maschinenbau, Institut für Strukturleichtbau, 


21 Cohen, Z.; Peled; A.; Mobasher, B.; Janetzko, S.; Gries, T. 

Hybrid cement-based composites: dynamic and static tensile behaviours 

In: Barros, Joaquim … (Eds.): Eigth RILEM International Symposium on Fibre Reinforced 

Concrete (BEFIB2012) : Challenges and Opportunities, Guimaraes, Portugal, 19-21 September 

2012. Bayeux : RILEM Publications, 2012, Datei: 02_570_Z.Cohen_et_al_Paper.pdf 

22 Cujic, I.; Gries, T. 

Smart automotive interior : textile concepts and products for electric vehicles 




23 Cujic, I.; Scheulen, K.; Gries, T. 

Heating textiles with positive temperature coefficient 



High Performance Material Technology (ITM), TU Dresden, 2012, Datei: p83_cujic.pdf 

24 De Clercq, G.; Haezebrouck, G.; Ghekiere, F.; Van Langenhove, L.; Vasile, S.; Gries, T.; Gloy, 

Y.-S.; Wendland, B. 

Ballistic behaviour of 3D multilayered fabrics woven on multirapier looms 

TexEng Software Ltd; Institut für Textiltechnik der RWTH Aachen University (Hrsg.): 4th World 

Conference on 3D Fabrics and their Applications, 10th - 11th September 2012, Aachen, 

Germany. - Aachen : TexEng Software Ltd; Institut für Textiltechnik der RWTH Aachen 

University, 2012, Paper: DeClercq, Geert - Ballistic Behaviour of 3D Multilayered Fabrics.pdf 

25 De Clercq, G.; Haezebrouck, G.; Ghekiere, F.; Van Langenhove, L.; Vasile, S.; Gries, T.; Gloy, 

Y.-S.; Wendland, B. 

Multirapier : a weaving technology with available capacity towards the production of 3D fabrics 




University, 2012, Paper: DeClercq - Multirapier A weaving technology with available capacity 

towards the production of 3D fabrics.pdf 

26 Eckers, V.; Gries, T. 

Entwicklung eines Prüfplans für Bewehrungen für Textilbeton 

Bautechnik 89 (2012), H. 11, S. 754-763 

DOI: 10.1002 / bate.201200032 

27 Eckers, V.; Janetzko, S.; Gries, T. 

Drape study on textiles for concrete applications 

Autex Research Journal 12 (2012), H. 2, S. 50-54, URL: 

http://www.autexrj.com/cms/zalaczone_pliki/0010_12.pdf 

28 Eichhoff, J.; Gries, T. 

Projekt Profitex : Smart Textiles für Feuerwehrleute 

(Providing firefighters with technology for excellent work safety) 

Technische Textilien 55 (2012), H. 1, S. 20 

(Technical Textiles 55 (2012), H. 1, S. E18-E19) 

3/20


29 Fabich, B.; Gries, T. 

Economic mass production of preforms using braiding technology 

In: Erath, Mark A. (Ed.): Strong Features to support the Lift-off : SEICO 12 ; SAMPE EUROPE 

33rd International Technical Conference & Forum, March 26th – 27th 2012, Paris. - Riehen : 

SAMPE EUROPE Conferences, 2012, S. 110-114 

30 Fabich, B.; Rosiepen, C.; Gries, T. 

Concept of an active carrier-based tension control system for braiding machines 




31 Fabich, B.; Rosiepen, C.; Gries, T. 

High quality braids : design for active tension control in carriers 

Beckwith, Scott W. … (Ed.): Navigating the Global Landscape for the New Composites : 

SAMPE Tech Conference & Exhibition, October 22-25, 2012, North Charleston, South 

Carolina. - Covina : Society for the Advancement of Materials and Process Engineering, 2012, 

Paper: 2554.pdf 

32 Fehér, K.; Jockenhövel, S. 

Fibre based drug delivery system 

Gesellschaft Deutscher Chemiker, Fachgruppe Makromolekulare Chemie (Hrsg.): Smart 

Polymers : Biennial Meeting of the GDCh-Division of Macromolecular Chemistry ; in 

Cooperation with the Study Group Macromolecules of the Netherlands Organisation for 

Scientific Research (NWOI, October 7 - 9, 2012, Mainz. - Frankfurt, M.: GDCh, 2012, S. 53 


Innovative Mikro-Stents auf der Basis von bioresorbierbaren Polymeren zur Behandlung von 

arteriosklerotisch bedingter Gefäßstenose 

Bionanomaterials 13 (2012), H. 1-4, S. 134 


Mikrogel-modifizierte Fasern aus Polycarbonaturethan zur laserinduzierten Wirkstofffreisetzung 

zur gezielten Tumorreduktion 


35 Fehér, K.; Leonards, H.; Bremus-Köbberling, E.; Schmitz, D.; Pich, A.; Junge, K.; Gries, T.; 

Jockenhövel, S. 

Laserinduzierte Wirkstofffreisetzung aus textilen Implantaten 

Füssel, Jens … (Hrsg.): 4. Dresdner Medizintechnik-Symposium : Innovationen in 

Medizintechnik und medizinischer Mess- und Sensortechnik, 3. bis 5. Dezember 2012, 

Dresden. - Dresden : TUDpress, 2012, S. 29-36 

36 Fehér, K.; Schuster, P.; Gries, T.; Jockenhövel, S. 

Innovative fiber based drug delivery system with controllable drug release 

In: Akcakoca Kumbasar, E. Perrin [u.a.] (Eds.): EGE Meditex : International Congress on 

Healthcare and Medical Textiles, May 17-18, 2012, Izmir/Turkey. - Izmir : Meta Basim 

Matbaacilik Hizmetleri, 2012, Datei: Innovative Fiber Based Drug Delivery System with 

Controllable Drug Release.pdf 

37 Fehér, K.; Schuster, P.; Gries, T.; Jockenhövel, S. 

Medical implants with controllable drug delivery 




4/20


38 Fehér, K.; Schuster, P.; Jockenhövel, S. 

Textilien in der Medizin : Faserbasierte Drug-Delivery-Systeme 

In: VDI Wissensforum GmbH (Hrsg.): Kunststoffe in der Medizintechnik : [VDI-Tagung 

"Kunststoffe in der Medizintechnik" ; 2012]. - Düsseldorf : VDI-Verl., 2012, S. 259-271 

39 Frese, J.; Hrdlicka, L.; Mertens, M.E.; Rongen, L.; Koch, S.; Schuster, P.; Gesché, V.N.; 

Lammers, T.; Mela, P.; Kiessling, F.; Jockenhövel, S. 

Non-invasive imaging of tissue-engineered vascular endothelium with iron oxide nanoparticles 

Biomedizinische Technik 57 (2012), Suppl. 1, S. 1065-1067, doi: 10.1515/bmt-2012-4472 

40 Frese, J.; Schuster, P.; Mertens, M.E.; Vogg, A.; Morgenroth, A.; Zlatopolskiy, B.; Dahlems, U.; 

Rongen, L.; Koch, S.; Mela, P.; Melmer, G.; Barth, S.; Mottaghy, F.M.; Schmitz-Rode, T.; 

Lammers, T.; Jockenhövel, S.; Kiessling, F. 

Generation and imaging of patient customized implants 

Biomedizinische Technik 57 (2012), Suppl. 1, doi: 10.1515/bmt-2012-4388 

41 Gesché, V.; Jockenhövel, S.; Koch, S.; Weinandy, S. 

Textil trifft Zelle : Züchtung körpereigener Gefäßprothesen 

RWTH Themen (2012), H. 2, S. 46-49 

42 Gesché, V.; Koch, S.; Rongen, L.; Mela, P.; Gries, T.; Jockenhövel, S. 

Textilbewehrte tissue engineerte Implantate und deren Potential für kardiovaskuläre 

Anwendungen 


43 Gesché, V.N.; Frese, J.; Koch, S.; Rongen, L.; Mela, P.; Jockenhövel, S. 

Zellbasierte Implantate in der Herzchirurgie : Chancen und Hürden einer zukunftsweisenden 

Technologie 

(Cell-Based Implants in Heart Surgery : Oportunities and Hurdles of this Future Oriented 

Technology) 

Endoskopie heute 25 (2012), H. 4, S. 271-275 

DOI httpx://dx.doi.org/10.1055/s-0032-1325593 

44 Gierlings, S.; Seide, G.; Gries, T. 

High-temperature bicomponent melt spinning 

Man-Made Fiber Year Book 2012 (2012), S. 55-56 

45 Glowania, M.; Heitefuss, P.; Jakobs, T.; Gries, T. 

Tufting of ultra high modulus pitch-based carbon fibres 




46 Glowania, M.H.E.; Kurgot, S.; Schneider, S.; Noll, M.; Gries, T.; Heider, D. 

Thermally conductive fibre reinforced composites using ultra high modulus pitch based carbon 

fibres 





47 Glowania, M.; Schneiders, S.; Hesselbach, J.; Simonis, K.; Gries, T. 

Knot- and loop tensile tests of ultra high-modulus pitch-based carbon fibers 



5/20


48 Gloy, Y.-S.; Fokin, E.; Islam, T.; Büllesfeld, R.; Raina, M.; Gries, T. 

Control of fabric weight in the weaving process 




49 Gloy, Y.-S.; Gries, T. 

Neuartige Streichbaumsysteme und deren Auswirkung auf den Webprozess 


50 Gloy, Y.-S.; Gries, T. 

Novel backrest systems and their influence on the weaving process 

Melliand International 18 (2012), H. 4, S. 222-225 

51 Gloy, Y.-S.; Löhrer, M.; Rosiepen, C.; Gries, T. 

Narrow fabrics for anterior cruciate ligament replacement 

In: Roi, Giulio Sergio; Della Villa, Stefano (Eds.): Abstract Book / XXI International Conference 

on Sport Rehabilitation and Traumatology : Football Medicine Strategies for Knee Injuries. 

Torigiano : Calzetti & Mariucci, 2012, S. 155 

52 Gloy, Y.-S.; Renkens, W.; Kato, S.; Gries, T. 

Simulation of warp tension for power looms 

The 88th Textile Institute World Conference 2012 : Bridging Innovation, Research and 

Enterprise. Selangor, Malaysia, 15th-17th May 2012, Datei: Yves-Simon Gloy, RWTH Aachen 

University.pdf 

53 Gloy, Y.-S.; Rosiepen, C.; Gries, T. 

Selvedge free woven narrow fabrics for medical applications 



Matbaacilik Hizmetleri, 2012, Datei: Selvedge Free Woven Narrow Fabrics for Medical 

Applications.pdf 

54 Gohil, U.; Koch, A.; Fabich, B.; Munzert, T.; Gries, T. 

Development of skeletal textile inlay for a flexible ceramic flue liner solution 

5th International Technical Textiles Congress, 7-9 November 2012, Crowne Plaza, 

Izmir/TURKEY. - Buca/Izmir : Dokuz Eylül University, Faculty of Engineering, Department of 

Textile Engineering, 2012, Datei:E:\abstracts\08.10.2012\parallel-session 5\session 

8\DEVELOPMENT OF SKELETAL TEXTILE INLAY FOR A FLEXIBLE CERAMIC FLUE LINER 

SOLUTION.pdf 

55 Greb, C.; Schnabel, A.; Haring, J.; Gries, T. 

Evaluation of novel preforming technologies for large-scale composite production 

In: Beckwith, Scott W.; Maher, M.; Newaz, Golam M.; Reyes-Villanueva, G. (Eds.): Emerging 

Opportunities: Materials and Process Solutions : Sampe 2012 Conference & Exhibition, May 

21-24, 2012, Baltimore, Maryland. - Covina : SAMPE, 2012, Datei: 2011.pdf 

56 Greb, C.; Schnabel, A.; Kruse, F.; Linke, M.; Gries, T. 

Cost-effective preform production for complex FRP structures 

JEC Composites Magazine 49 (2012), H. 76, S. 74-79 

57 Greb, C.; Schnabel, A.; Michaelis, D.; Gries, T. 

Economic potential of single- and multi-step preforming for large-scale production of composite 

structures 

Society of Plastic Engineers (Ed): SPE-ACCE 2012 : 12th Annual Automotive Composites 

Conference and Exhibition, Troy, MI, September 11-13, 2012. - Newtown, CT: Society of 

Plastics Engineers, 2012, URL: http://speautomotive.com/SPEA_CD/SPEA2012/pdf/pf/PF2.pdf 

6/20


58 Gries, T.; Veit, D. 

Higher education courses in textile science : present and future 

In: Shishoo, Roshan L. (Ed.): The global textile and clothing industry : technological advances 

and future challenges. - Oxford [u.a.] : Woodhead, 2012, S. 89-112 

59 Hacker, C.; Ali, R.; Seide, G.; Gries, T. 

Unconventional bonding technology for thermoplastic nonwovens from submicron fibers 

In: EDANA (Hrsg.): Nonwovens Research Academy, 19 and 20 April, 2012, Gothenburg, 

Sweden. - Brussels : EDANA, 2012 

60 Harbers, T.; Gries, T. 

Use of composite parts in the drive of a sewing machine to reduce noise and power 

consumption 





61 Harbers, T.; Niebel, V.; Raina, M.; Gries, T. 

Potenziale in der Nähtechnologie 

(Potentials in sewing technology) 

Technische Textilien 55 (2012), H. 2, S. 82-83; Melliand-Newsletter Juni 2012, URL: 

http://textination.de/de/document/1133961267588317/1.0/2012-2-TTd%20Harbers.pdf; 



62 Haupt, M.; Diestel, O.; Cherif, C.; Janetzko, S.; Gries, T. 

Abstandstextilien : die textile Knautschzone für Fußgänger ; Entwicklung integraler 

Dämpfungsstrukturen für Motorhauben aus Abstandsflachgestricken und 

Abstandskettengewirken 

Melliand-Newsletter Juli 2012, URL: 

http://textination.de/de/document/1134229410096267/2.0/ITA%20Abstandstextilien.pdf 

63 Hehl, A.; Allmendinger, F.; Corves, B.; Gries, T. 

Schwingungsreduktion im Fachbildungsstrang 







64 Heidelmann, M.; Wulfhorst, J.; Weirich, T.; Gries, T. 

Tomographic investigation of CNT orientation in melt-spun fibers 

The 15th European Microscopy Congress, Manchester, United Kingdom, 16th - 21th 

September 2012, URL: 

http://www.emc2012.org.uk//documents/Abstracts/Abstracts/EMC2012_0029.pdf 

65 Holtermann, T.; Gries, T. 

Optical system for improving the weft insertion stability in air-jet weaving 





66 Holtermann, T.; Rosiepen, C.; Gries, T.; Hänsch, F.S.; Hitz, K. 

Analyse hochdynamischer Garnbewegungen durch digitale Bildverarbeitung am Beispiel des 

Luftdüsenwebens 


7/20


67 Holtermann, T.; Schneider, D.; Koßmann, U.; Niebel, V.; Gries, T.; Schmitt, R. 

Integratives Messsystem zur Fehlererkennung während der textilen Flächenherstellung 



High Performance Material Technology (ITM), TU Dresden, 2012, Datei: p95_holtermann.pdf 

68 Hörr, M.; Jockenhövel, S.; Gries, T.; Schwarz, A.; de Vilder, I. 

ALL4REST : integrated solutions for improving the quality of the rest 

Melliand-Newsletter Februar 2012, URL: 

http://textination.de/de/document/1132906142660593/1.0/ALL4REST.pdf 

69 Hörr, M.; Monfeld, C.; Jockenhövel, S.; Gries, T. 

Textile Sensoren für die Rehabilitations- und Orthopädietechnik 

Füssel, Jens … (Hrsg.): 4. Dresdner Medizintechnik-Symposium : Innovationen in 

Medizintechnik und medizinischer Mess- und Sensortechnik, 3. bis 5. Dezember 2012, 

Dresden. - Dresden : TUDpress, 2012, S. 59-66 

70 Janetzko, S.; Gries, T.; Haupt, M.; Diestel, O.; Cherif, C.; Eckstein, L.; Berger, L. 

Polfadenschicht im 3D-Gewirk : Knautschzone für Fußgänger ; Entwicklung eines 

multifunktionellen Kopfaufprallschutzes für Motorhauben 

(The pile yarn layer in 3D warp-knitted textiles : the crumple zone for pedestrians ; the 

development of a multifunctional head-impact system for car bonnets based on, among other 

things, warp-knitted spacer textiles) 

Kettenwirk-Praxis 46 (2012), H. 1, S. 24-27 

71 Janetzko, S.; Pidun, K.; Gries, T.; Oslowsky, J.; Raupach, M. 

Textilbewehrte Spritzmörtelschichten zur Wasserbauwerk-Instandsetzung 

(Textile reinforced sprayed mortar layer for the repair of water engineering structures) 

Technische Textilien 55 (2012), H. 3, S. 114-115 


72 Jockenhövel, S. 

Fibre-reinforced tissue engineering of cardiovascular implants 



Matbaacilik Hizmetleri, 2012, Datei: Fibre-Reinforced Tissue Engineering of Cardiovascular 

Implants.pdf 

73 Jockenhövel, S.; Gesché, V. 

Qualitätsmanagement : auch im Forschungsbereich Medizinische Textilien relevant 

Technologie & Management : t & m 61 (2012), H. 2, S. 16-18, URL: 

http://www.vwi.org/uploads/media/Qualitaetsmanagement.pdf 

74 Jungbecker, P.; Veit, D. 

Computational fluid dynamics (CFD) and its application to textile technology 

In: Veit, Dieter (Ed.): Simulation in textile technology : theory and applications. - Oxford [u.a.] : 

Woodhead, 2012, S. 142-171 

75 Karadagli, I.; Milow, B.; Ratke, L.; Schulz, B.; Seide, G.; Gries, T. 

Porous cellulose aerogel fibres prepared by the aqueous calcium thiocyanate process 



High Performance Material Technology (ITM), TU Dresden, 2012, Datei: p29_karadagli.pdf 

76 Karadagli (Kayacan), I.; Milow, B.; Ratke, L.; Schulz, B.; Seide, G.; Gries, T. 

Synthesis and characterization of highly porous cellulose aerogels for textiles applications 

In: Deutsche Gesellschaft für Materialkunde e.V. ; Fraunhofer-Institut für Fertigungstechnik und 

Angewandte Materialforschung IFAM (Hrsg.): Proceedings Cellular Materials : Cellmat2012, 7- 

9 November 2012, Dresden, Germany. - Frankfurt am Main : DGM Deutsche Gesellschaft für 

Materialkunde, 2012, Datei: I._Kayacan_Karadagli.pdf 

8/20


77 Klietzing, T.; Tiedt, T.; Raina, M.; Seide, G.; Gries, T.; Maas, M.; Wüscht, M.; Geus, H.G. 

Qualivlies : objective quality evaluation method of nonwovens based on subjective quality 

evaluation 

(Qualivlies : objektive Qualitätsbewertungsmethode auf Basis subjektiver 

Qualitätswahrnehmung von Vliesstoffen) 

Chemical Fibers International 62 (2012), H. 2, S. 100-101; Technical Textiles 55 (2012), H. 3, 

S. E104-E105; Man-Made Fiber Year Book 2012 (2012), S. 76-77 

(Technische Textilien 55 (2012), H. 3, S. 119-120) 

78 Klingele, J.; Gries, T. 

Textiles Preforming mit Hochleistungsfaserwerkstoffen für Automobilanwendungen 

51. Chemiefasertagung Dornbirn = 51th Dornbirn Man-Made Fibers Congress : Communicating 

the Future of Man-made Fibers, 19.-21. September 2012, Austria. Wien : Österreichisches 

Chemiefaser-Institut, 2012, Paper: B_1909_1445_Klingele.pdf 

79 Koch, A.; Lee, H.-Y.; Gries, T. 

Integration of capillary tubes in textile reinforced concrete components for heat water using 

Abstract Book / 2012 EU-Korea Conference on Science and Technology. Theme: The Future. 

26 - 28 July 2012, Berlin, Germany. - Berlin : EKC, 2012, S. 117 

80 Koch, A.; Tomoscheit, S.; Quadflieg, T.; Gries, T 

Smart textile reinforced concrete for natural disaster control 

The 26th Umbrella Symposium on Sustainabel Urban Development, Sunday, March 18 - 

Tuesday, March 20, 2012, Haifa, Israel. - Haifa : Technion, 2012, S. 31 

81 Kochanek, C.; Kowallik, K.; Gries, T. 

Hybrid metall-FRP structures for multi-material construction 



High Performance Material Technology (ITM), TU Dresden, 2012, Datei: p76_kochanek.pdf 

82 Kravaev, P.; Stolyarov, O.; Seide, G.; Gries, T. 

Influence of process parameters on filament distribution and blending quality in commingled 

yarns used for thermoplastic composites 

Journal of Thermoplastic Composite Materials (2012) Online first, 24.05.2012 

DOI: 10.1177/0892705712446167 

83 Krieger, H.; Gries, T.; Christ, M.; Peters, C.; Hasselbruch; H.; Schimanski, K. 

Thermoformen : Aus Organoblechen werden Großserienteile 

Maschinenmarkt Nr. 234 vom 25.09.2012 ; blechnet 11.09.2012, URL: 

http://www.blechnet.com/themen/konstruktion/articles/378063/?cmp=beleg-mail 

84 Krieger, H.; Sköck-Hartmann, B.; Christ, M.; Gries, T.; Herrmann, A.S. 

Charakterisierung der Drapierbarkeit von Verstärkungstextilien : Geräteentwicklung für die 

Drapierbarkeitsprüfung 

Konstruktion 64 (2012), H. 6, S. IW14-IW16 

85 Krieger, H.; Sköck-Hartmann, B.; Eckers, V.; Gries, T. 

Prüfmethoden zur Materialcharakterisierung und Simulation des Drapierprozesses : 

Drapierbarkeit von Verstärkungstextilien 

Konstruktion 64 (2012), H. 11, S. IW8-IW10 

86 Krieger, H.; Sköck-Hartmann, B.; Gries, T.; Miene, A. 

Bestimmung der Querkontraktionszahl textiler Halbzeuge mittels Bildanalyse 


9/20


87 Kuckhoff, B.; Klingele, J.; Linke, M.; Gries, T.; Bobzin, K.; Schläfer, T.; Kashko, T.; Öte, M. 

Textile-reinforced piston rod 

In: Schmitz, Georg J.; Prahl, Ulrich (Eds.): Integrative Computational Materials Engineering : 

Concepts and Applications of a Modular Simulation Platform. - Weinheim : Wiley-VCH, 2012, 

S. 257-279 

88 Lemm, J.; Vestweber, N.; Seide, G.; Gries, T. 

CFM : Center for high performance fiber materials in Aachen/Germany 

Chemical Fibers International 62 (2012), H. 4, S. 161 

89 Lengersdorf, M.; Gries, T. 

The use of overbraiding in the process of developing a textile based solution for chimney flue 

liners 



High Performance Material Technology (ITM), TU Dresden, 2012, Datei: p82_lengersdorf.pdf 

90 Linke, M.; Greb, C.; Klingele, J.; Schnabel, A.; Gries, T. 

Automating textile preforming technology for mass production of fibre-reinforced polymer (FRP) 

composites 

In: Shishoo, Roshan L. (Ed.): The global textile and clothing industry : technological advances 

and future challenges. - Oxford [u.a.] : Woodhead, 2012, S. 171-195 

91 Neumann, F. 

Reduzierung spannungsbedingter Gewebefehler durch Entwicklung eines individuell 

regelbaren Teilkettbaumsystems 

fiber news : Magazin des Fiber International Bremen e.V. (2012), S. 5 

92 Neumann, F.; Lenz, C.; Harbers, T.; Gries, T. 

Improvement of uneven warp tension distribution using a sectional warp beam device 




93 Neumann, F.; Schöfer, S.; Lenz, C.; Harbers, T.; Gries, T.G. 

Increased yarn tension at weaving selvedge for better productivity and fabric quality 



High Performance Material Technology (ITM), TU Dresden, 2012, Datei: p84_neumann.pdf 

94 Neumann, F.; Weidner, F.; Hehl, A.; Gries, T.; Riedlinger, R.; Schulz, P.; Gillessen, B. 

Ultrafeine technische Gestricke für Filtrationsanwendungen 

Melliand Textilberichte 93 (2012), H. 4, S. 197 

95 Niebel, V.; Gries, T. 

Development of a marking and automative handling device for semi-finished textiles 





96 Niebel, V.; Kotthoff, T.; Gries, T. 

Investigation of joints for functional OPV-foils on textiles 



10/20


97 Niebel, V.; Seehausen; S.; Gries, T.; Manuel, K.-L.; Herzer, K.; Recktenwald, J. 

Closed loop control for textile welding machines 




98 Pico, D.; Jansen, M.; Seide, G.; Gries, T. 

Pyrolysis and recycling of the reinforcement from wind blades scraps : a case study 

Gidarakos, Evangelos … (Eds.): Crete 2012 : 3rd International Conference on Industrial and 

Hazardous Waste Management, 12 - 14 September 2012, Chania, Crete, Greece. - Chania : 

Technical University of Crete, Greece, 2012, S. 77-78, Paper: E:\Crete2012 e- 

Proceedings\data\pdf_files\S5.6.pdf 

99 Pico, D.; Lichtenwald, D.; Seide, G.; Gries, T. 

Thermo-chemical processes : the green way to glass fiber reinforced plastic waste 

management 

Achema 2012, Frankfurt am Main 18. - 22.06.2012, URL: 

http://kongress.achema.de/Beitragseinreichung/Congress+Planner/Datei_handler-tagung-559- 

file-5098-p-44.html 

100 Pico, D.; Tiedt, T.; Nieberding, N.; Storek, T.; Seide, G.; Gries, T. 

Recovery and recycling of glass fiber reinforcement from wind blades 







101 Pico, D.; Wilms, C.; Seide, G.; Gries, T.; Kleinholz, R.; Tiesler, H.: 

Fibers, 12. Glass Fibers 

Ullmann's Encyclopedia of Industrial Chemistry. 7. edition, release 2010. - Weinheim [u.a.] : 

Wiley-VCH, 2012 

DOI: 10.1002/14356007.o11_o01.pub2 

102 Pidun, K.; Janetzko, S.; Gries, T.; Kulas, C.; Hegger, J. 

Geformte textile Bewehrungselemente für Betonbauteile 

(Formed textile reinforcement elements for concrete components) 


(Technical Textiles 55 (2012), H. 4, S. E131-132) 

103 Pohlen, V.; Schnabel, A.; Neumann, F.; Gries, T. 

Optimisation of the warp yarn tension on a warp knitting machine 

Autex Research Journal 12 (2012), H. 2, S. 29-33, URL: 

http://www.autexrj.com/cms/zalaczone_pliki/0006_12.pdf 

104 Quadflieg, T.; Tomoscheit, S.; Gries, T. 

Natural disaster control with smart textile reinforced concrete 

Wainshtok Rivas, Hugo … (Eds.): Ferro10 : X Simposio Internacional del Ferrocemento y 

Compuestos Delgados de Cemento Reforzado = 10th International Symposium on 

Ferrocement and Thin Reinforced Cement Composites, La Habana, Cuba, 15-17 de octubre 

de 2012. - La Habana : Palcograf, 2012, S. 517-522 

105 Ramaswamy, S.; Arif, J.; Raina, M.; Gries, T. 

Process technologies for biopolymer staple fibres in health-care applications 

The Fiber Society (Hrsg.): Fiber Research for Tomorrow's Applications : The Fiber Society 

Spring 2012 Conference, Empa, St. Gallen, Switzerland, May 23-25. - Raleigh : The Fiber 

Society, 2012, S. 85-86 

11/20


106 Ramaswamy, S.; Aslan, B.; Raina, M.; Gries, T. 

Biocomposites : processing of blends of thermoplastic biopolymer fiber and industrial natural 

fibres 




107 Ramaswamy, S.; Aslan, B.; Raina, M.A.; Gries, T. 

Bio-Composites sind in 

Textile Network 10 (2012), H. 5-6, S. 20-21 

108 Reichardt, A.; Arshi, A.; Schuster, P.; Polchow, B.; Shakibaei, M.; Gries, T.; Henrich, W.; 

Hetzer, R.; Lüders, C. 

Custom-made generation of three-dimensional nonwovens composed of polyglycolide or 

polylactide for the cardiovascular tissue engineering 

Journal of Biomaterials and Tissue Engineering 2 (2012), H. 4, S. 322-329 

109 Rosiepen, C.; Gries, T. 

Textile Tribologie : Verarbeitung von Hochmodulfasern 

Melliand Textilberichte 93 (2012), H. 2, S. 91-93; Technische Textilien 55 (2012), H. 3, S. 102- 

104 

110 Roß, R.; Hegge, B.; Mela, P.; Gries, T.; Jockenhövel, S. 

Textile reinforcement of fibrin based tissue engineered heart valves 

Biomedizinische Technik 57 (2012), Suppl. 1, DOI: 10.1515/bmt-2012-4480 

111 Rübsam, U.; Seide, G.; Gries, T. 

Melt electrospun nonwovens for waste water management 

Filtrex 2012 : a Filtration Conference and Exhibition, 17-18 October 2012, Cologne (Germany). 

- Brussels: EDANA, 2012, n.p. 

112 Rypl, R.; Chudoba, R.; Mörschel, U.; Eckers, V. 

New tensile test device for high modulus multi-filament yarns 




113 Sasse, C.; Holtermann, T.; Seide, G.; Gries, T. 

Energieeinsparung beim Luftweben durch modellbasierte Adaption von 

Stafettendüsenlaufzeiten 



High Performance Material Technology (ITM), TU Dresden, 2012, Datei: p79_sasse.pdf 

114 Sasse, C.D.; Holtermann, T.; Stankowski, M.R.; Seide, G.H.; Gries, T.G. 

Optimizing of compressed-air consumption in air-jet weaving machines by modeling and 

simulating of weft insertion 

ECCOMAS 2012 Congress CD-ROM Proceedings: European Congress on Computational 

Methods in Applied Sciences and Engineering, September 10-14, 2012, Vienna, Austria. 

Vienna : Vienna University of Technology, 2012, S. 367-372, Paper: 1480/1480_000828_2012- 

07-09_P9.pdf 

115 Sasse, C.; Holtermann, T.; Stankowski, M.; Seide, G.; Gries, T. 

Reduction of compressed-air consumption in air-jet weaving machines by simulation of weft 

insertion 




12/20


116 [Schäfer, J.] 

Flechttrusion : Prozessentwicklung zur automatisierten Fertigung geflochtener Bauteile mit 

thermoplastischer Matrix 

Report Kunststoffland NRW e.V. (2012), H. 1, S. 8 

117 Schäfer, J.; Ali, R.; Azamat, A.; Lenzen, P.; Glowania, M.; Gries, T. 

Flechttrusion : process development for an automated production of braided parts with 

thermoplastic matrices 





118 Schäfer, K.; Wang, H.; Pich, A.; Möller, M.; Damm, C.; Peukert, W.; Wilms, C.; Seide, G.; 

Gries, T. 

Lumineszierende Synthesefasern für Warn- und Sicherheitssysteme 

(Novel luminescent composite polymer fibers for warning and security systems) 

Technische Textilien 55 (2012), H. 3, S. 110-112 ; Melliand-Newsletter November 2012, URL: 

http://textination.de/de/document/1135264729359623/1.0/2012-3-TTd%20Schaefer.pdf 

(Technical Textiles 55 (2012), H. 3, S. E94-E96; Chemical Fibers International 62 (2012), H. 3, 

S. 130-132) 

119 Scheulen, K.; Cujic, I.; Gries, T. 

Concepts for automobile interior lighting integrated into textiles 

5th International Technical Textiles Congress, 7-9 November 2012, Crowne Plaza, 

Izmir/TURKEY. - Buca/Izmir : Dokuz Eylül University, Faculty of Engineering, Department of 

Textile Engineering, 2012, Datei: E:\abstracts\09.10.2012\parallel-session 3\session 

3\CONCEPTS FOR AUTOMOBILE INTERIOR LIGHTING INTEGRATED INTO TEXTILES.pdf 

120 Schmenk, B. 

Von der Herz- zur Heckklappe : Menschen entwickeln, Innovationen gestalten ; Textil als 

Beruf(ung)! 

Forward Textile Technologies 10 (2012), H. 3, S. 20-22 

121 Schnabel, A.; Greb, C.; Abel, P.; Kurtenbach, S.; Gries, T. 

Warp-knitting of non-crimp fabrics with local reinforcements 




122 Schnabel, A.; Greb, C.; Jäger, C.; Linke, M.; Gries, T. 

Prospective strategies for composite production 

JEC Composites Magazine 49 (2012), H. 73, S. 59-64 

123 Schnabel, A.; Greb, C.; Jäger, C.; Linke, M.; Gries, T. 

Prospective strategies for composite production 

Melliand-Newsletter April 2012, URL: 

http://textination.de/de/document/1133422669216815/2.0/Prospective%20strategies%20for%2 

0composite%20production.pdf 

124 Schnabel, A.; Ölscher, M.; Gries, T. 

Determination of influences on the spreading results of heavy tows 




13/20


125 Schneider, D.; Holtermann, T.; Neumann, F.; Hehl, A.; Aach, T.; Gries, T. 

A vision based system for high precision online fabric defect detection 

ICIEA 2012 : 7th IEEE Conference on Industrial Electronics and Applications, 18-20 July 2012 

Singapore, S. 1494-1499, URL: 

http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6360960, DOI 

10.1109/ICIEA.2012.6360960 

126 Schreiber, F. 

Neue Flechtverfahren für geflochtene Implantate der Zukunft : durch innovative Flechtverfahren 

bei der Herstellung von Stents entstehen neue Möglichkeiten in der Therapie von 

Gefäßerkrankungen sowie eine zusätzliche Palette von Stentprodukten für die Zukunft 

Deutsche Zeitschrift für klinische Forschung : DZKF 16 (2012), H. 3/4, S. 42-44 

127 Schreiber, F. 

Zerreißprobe wird abgeschafft 

Medizin & Technik : Ingenieurwissen für die Medizintechnik (2012), H. 2, S. 72 

128 Schulte Südhoff, E.; Raina, M.A.; Gries, T. 

Methode zur Klassifizierung luftechtdrahtgesponnener Garne 


129 Schulz, B.; Seide, G.; Gries, T.; Karadagli (Kayacan), I.; Milow, B.; Ratke, L. 

Aerocellulose : technische Anwendungen von nanoporösen Hochleistungsfasern 



Chemiefaser-Institut, 2012, Paper: A_2109_0950_Schulz.pdf 

130 Schulz, B.; Seide, G.; Gries, T.; Karadagli (Kayacan), I.; Milow, B.; Ratke, L. 

The Aero-Fib project 

Chemical Fibers International 62 (2012), H. 1, S. 41 ; Man-Made Fiber Year Book 2012 (2012), 

S. 65 

131 Schulz, B.; Seide, G.; Gries, T.; Kayacan, I.; Milow, B.; Ratke, L. 

Characterization and spinning of highly porous aero-cellulosic fibres for application in technical 

textiles 




132 Schuster, P.; Bach, C.; Arshi, A.; Laar, N.; Jockenhövel, S.; Gries, T. 

Quasi-kontinuierliche Vliesbildung für innovative Medizintextilien 

Technische Textilien 55 (2012), H. 1, S. 34 

133 Schuster, P.; Fehér, K.; Gries, T.; Jockenhövel, S. 

Fiber based drug delivery system with controllable drug release 



Chemiefaser-Institut, 2012, Paper: C_2009_1100_Schuster.pdf 

134 Schuster, P.; Gries, T.; Jockenhövel, S. 

Appropriate buffer systems as additives to melt spun polyglycolic acid (PGA) fibres 



Choice and evaluation of buffer systems to realize a PH neutral degradation of polyglycolic acid 

(PGA) 



Matbaacilik Hizmetleri, 2012, Datei: Choice and Evaluation of Buffer Systems to realize a Ph 

Neutral Degradation of Polyglycolic Acid.pdf 

14/20



Incorporation of buffer systems to melt spun polyglycolic acid (PGA) fibers 




137 Schuster, P.; Jockenhövel, S. 

Textile Strukturen mit Wirkstoffen 

(Textile Structures with Active Ingredients) 

Kunststoffe 102 (2012), H. 2, S. 70-74 

(Kunststoffe International 102 (2012), H. 2, S. 43-46) 

138 Seuß, R.; Märtin, J.; Fichtner, S.; Abel, P.; Gries, T. 

Multi-axial-technology for the production of innovative textile semi-finished products for wind 

energy 




139 Sköck-Hartmann, B.; Krieger, H.; Gries, T.; Mörschel, U. 

Bestimmung der Biegesteifigkeit textiler Flächengebilde 


140 Sköck-Hartmann, B.; Mörschel, U.; Krieger, H.; Miene, A.; Christ, M.; Gries, T.; Herrmann, A.; 

Glowania, M. 

Characterizing the drapability of NCFs 



High Performance Material Technology (ITM), TU Dresden, 2012, Datei: 

lecture_sköckhartmann_moerschel.pdf 

141 Steinmann, W.; Glauß, B.; Walter, S.; Wulfhorst, J.; Seide, G.; Gries, T. 

Modern methods in fiber analysis for advanced quality control and process development 

Chemical Fibers International 62 (2012), H. 2, S. 95-97 

142 Steinmann, W.; Vad, T.; Seide, G.; Gries, T.; Roth, G. 

Simultaneous analysis of structure and orientation in polymeric fibers by wide-angle X-ray 

diffraction 




143 Steinmann, W.; Walter, S.; Gries, T.; Seide, G.; Roth, G. 

Modification of the mechanical properties of polyamide 6 multifilemants in high-speed melt 

spinning with nano silicates 

Textile Research Journal 82 (2012), H. 18, S. 1846-1858 

DOI:10.1177/0040517512456756 

144 Steinmann, W.; Walter, S.; Seide, G.; Gries, T. 

Struktur, Eigenschaften und Phasenübergänge von schmelzgesponnenen Polyvinylidenfluorid- 

Fasern 

(Structure, properties and phase transitions of melt-spun polyvinylidene fluoride fibers) 

(Structure, propriétés et transitions de phase de fibres de polyfluorure de vinylidène filées à 

chaud) 

Thermal Analysis User Com (2012), H. 35, S. 19-22 

15/20


145 Steinmann, W.; Walter, S.; Wulfhorst, J.; Klein, F.; Seide, G.; Gries, T. 

Electrically conductive, nanocomposite fibers for the generation of piezoelectric and 

piezoresistive stress sensors 




146 Steinmann, W.; Wulfhorst, J.; Ros, J.; Beckers, M.; Seide, G.; Gries, T. 

Application of electrically conductive, melt-spun polymer fibers as heating elements 




147 Steinmann, W.; Wulfhorst, J.; Seide, G.; Gries, T. 

Electrical conductivity in polymeric fibers by the incorporation of carbon nanotubes 




148 Steinmann, W.; Wulfhorst, J.; Vad, T.; Beckers, M.; Seide, G.; Gries, T. 

Controlling the structure of nanocomposite fibers : application to electrically conductive fibers 

and fiber based solar cells 

Tanger Ltd. (Ed.): Conference Proceedings : Nanocon 2012 ; 4th International Conference, 

October 23rd - 25th 2012, Brno, Czech Republic. - Ostrava : Tanger, 2012, Datei: 988.pdf 

149 Steinmann, W.; Wulfhorst, J.; Vad, T.; Seide, G.; Gries, T.; Heidelmann, M.; Weirich, T. 

Electrically conductive fibers with carbon nanotubes : 3D analysis of conductive networks by 

electron tomography 

The Fiber Society (Ed.): Rediscovering Fibers in the 21th Century : The Fiber Society 2012 Fall 

Meeting and Technical Conference in partnership with Polymer Fibres 2012, November 7-9, 

2012, Boston, Massachusetts, USA. - Raleigh, NC: The Fiber Society, 2012 

150 Tiedt, T.; Klietzing, T.; Raina, M.; Seide, G.; Gries, T.; Geus, H.G.; Block, M.; Wüscht, M. 

Customer-oriented quality characterization of technical nonwoven textiles 



Society, 2012, S. 297 

151 Tomoscheit, S.; Gohil, U.; Gries, T. 

Textile reinforced concrete : providing sustainability for flexible urban concepts 





152 Tomoscheit, S.; Gries, T.; Horstmann, M.; Hegger, J. 

Reducing the carbon footprint in concrete construction : a case study 





153 Tomoscheit, S.; Lee, H.-Y.; Gries, T. 

Eco-efficient building using textile reinforced concrete technology 

Abstract Book / 2012 EU-Korea Conference on Science and Technology. Theme: The Future. 

26 - 28 July 2012, Berlin, Germany. - Berlin : EKC, 2012, S. 30-31 

16/20


154 Trevisan, B.; Bosowski, P.; Schaar, A.K.; Quadflieg, T.; Jakobs, E.-M.; Jockenhövel, S.; Gries, 

T.; Ziefle, M. 

Acceptable studies on smart textiles : an interdisciplinary cooperation to understand users' 

acceptance 



Society, 2012, S. 307-308 

155 Urbanus, M.; [Aslan, B.; De Vriese, L.] 

NATUREWINS – Development of fully renewable thermoplastic composites via hybrid fabrics 



Chemiefaser-Institut, 2012, Paper: A_2009_1620_Urbanus.pdf 

156 Van der Loop, T.H.; Panman, M.R.; Lotze, S.; Zhang, J.; Vad, T.; Bakker, H.J.; Sager, W.F.C.; 

Woutersen, S. 

Structure and dynamics of water in nonionic reverse micelles : a combined time-resolved 

infrared and small x-ray scattering study 

The Journal of Chemical Physics 137 (2012), H. 4, S. 4503-1 - 4503-9 

157 Veit, D. 

Evolutionary methods and their application to textile technology 



158 Veit, D. 

Fuzzy logic and its application to textile technology 



159 Veit, D. 

Introduction to modelling and simulation in textile technology 



160 Veit, D. 

Neural networks and their application to textile technology 



161 Veit, Dieter (Ed.) 

Simulation in textile technology : theory and applications 

Oxford [u.a.] : Woodhead, 2012 

(Woodhead Publishing Series in Textiles ; 136) 

162 Veit, D. 

Simulation of textile machinery 



163 Vestweber, N.; Seide, G.; Gries, T.; Holtermann, T.; Gloy, Y.-S.; Bonse, R. 

Rüsten in der Weberei : Verbesserungspotenziale methodisch erarbeiten 

Technologie & Management : t & m 61 (2012), H. 6, S. 34-37 

164 Walter, S.; Steinmann, W.; Seide, G.; Gries, T.; Roth, G. 

Development of innovative fibre materials for technical applications : fine polyvinylidene fluoride 

filaments and fabrics 

Filtration 12 (2012), H. 1, S. 60-64 

17/20


165 Warnecke, M. 

Carbon fibers : trends in economical and technological development 

(Carbonfasern : aktuelle Markt- und Entwicklungstendenzen) 



Chemiefaser-Institut, 2012, Paper: A_2009_1710_Warnecke_D+E.pdf 

166 Warnecke, M.; Poggenburg, B.; Seide, G.; Gries, T. 

Der Carbonfasermarkt : ein Update 

(The carbon fiber market : an update) 

Technische Textilien 55 (2012), H. 5, S. 185-166; Melliand-Newsletter Januar 2013, URL: 

http://textination.de/de/document/1135827235036753/1.0/2012-5-TTd%20Warnecke.pdf 

(Technical Textiles 55 (2012), H. 5, S. E151-E152 ; Chemical Fibers International 62 (2012), H. 

4, S. 189-190) 

167 Warnecke, M.; Seide, G.; Gries, T. 

Research and market trends in carbon fibre production 




168 Warnecke, M.; Steinmann, W.; Woznitza, R.; Seide, G.; Gries, T. 

Structural analysis of carbon fibers using X-ray diffraction 




169 Weidner, F. 

Alternative Werkstoffe im Automotive-Bereich 

(Alternative materials in the automotive sector) 

avr Allgemeiner Vliesstoff-Report 41 (2012), H. 3, S. 55-57 

170 Weinandy, S.; Rongen, L.; Schreiber, F.; Cornelissen, C.; Flanagan, T.C.; Mahnken, A.; Gries, 

T.; Schmitz-Rode, T.; Jockenhövel, S. 

The BioStent : Novel Concept for a Viable Stent Structure 

Tissue Engineering Part A 18 (2012), H. 17-18, S. 1818-1826, doi:10.1089/ten.tea.2011.0648 

171 Wendland, B.; Baur, P. vom; Gries, T. 

3D profile weaving for mass production on conventional narrow looms 




University, 2012, Paper: Wendland, Benedikt - 3D profile weaving for mass production on 

conventional narrow looms.pdf 

172 Wendland, B.; Ghekiere, F.; Abel, P.; Raina, M.; De Clercq, G.; Haezebrouck, G.; Gries, T. 

Analysis of delamination and strength properties of multilayer 3D fabric composites 




173 Wendland, B.; Ghekiere, F.; de Clercq, G.; Haezebrouck, G.; Abel, P.; Gries, T. 

Dependencies between weaving parameters and mechanical properties of 3D woven 

composites 




18/20


174 Wendland, B.; Gries, T. 

Entwicklungstrends des textilen Festigkeitsträgers im Reifen 

(Developments of tire reinforcements) 



175 Wendland, B.; Meyer, M.; Gries, T. 

Parametric-iterative dimensioning of a 3D woven omega-reinforcing profile 




176 Wilms, C.; Seide, G.; Gries, T. 

Tailoring the structure of wet-spun fibres 




177 Wilms, C.; Seide, G.; Gries, T.; Schäfer, K.; Wang, H.; Doermbach, K.; Pich, A.; Möller, M.; 

Damm, C.; Peukert, W. 

Novel luminescent polymer films and filaments for warning and security systems 







178 Wiszniewski, G.; Seide, G.; Gries, T. 

Fiber converter for cutting fiber rovings 




179 Wulfhorst, J.; Hehl, A.; Gries, T. 

Ultrafine knitted fabrics from polyester filament yarns 





180 Wulfhorst, J.; Heidelmann, M.; Steinmann, W.; Walter, S.; Dolmans, R.; Seide, G.; Weirich, T.; 

Gries, T. 

Orientation and product properties of nanoparticle additivated meltspun fibers by electron 

tomography 







181 Wulfhorst, J.; Heidelmann, M.; Weirich, T.; Gries, T. 

3D investigation of nanoadditives in meltspun polymer fibres by tomographic imaging in TEM 




19/20


182 Wulfhorst, J.; Heidelmann; M.; Steinmann, W.; Vad, T.; Seide, G.; Weirich, T.; Gries, T. 

Tomographic analysis of nanoparticles in meltspun filaments 



Chemiefaser-Institut, 2012, Paper: A_1909_1800_WulfhorstJohannes.pdf 

183 Wulfhorst, J.; Steinmann, W.; Seide, G.; Gries, T.; Heidelmann, M.; Weirich, T. 

Nanoparticles as functional additives in meltspun filament yarns 




184 Zobel, S.; Raina, M.; Gries, T. 

Development of an online positioning system for the carding machine 




20/20

Veröffentlichungen 2012 - Institut für Textiltechnik - RWTH Aachen ...

Create successful ePaper yourself

Delete template?

Save as template?