ELEMEnTS - Jardin-Confort
ELEMEnTS - Jardin-Confort
ELEMEnTS - Jardin-Confort
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
teak<br />
support<br />
AGED teak (AT)<br />
teak<br />
wrought iron (PWI)<br />
• Superior quality teak wood (VINIR & HARA) aged 60 to 80 years,<br />
sourced from ecological plantations<br />
• Great stability under the effect of UV radiation,<br />
chlorine and sea water<br />
• Easy to clean, various specific treatments possible<br />
(see Manutti care line)<br />
• For outdoor and indoor use<br />
• 100% recyclable<br />
AGED teak<br />
AT<br />
Polished aluminium (poa)<br />
Aged teak was produced out of massive teak which has been aged; ”Aged teak” has been<br />
selected by Manutti but has of course a less uniform appearance than new teak.<br />
Possible minor irregularities have been repaired or reworked during the process.<br />
These are limited as much as possible but cannot be completely avoided.<br />
The furniture is 100% for exterior use.<br />
Aged teak has been sandblasted and brushed to obtain a weathered look.<br />
• Easy to clean and maintain<br />
• For outdoor and indoor use<br />
• Recommended near the sea, a swimming pool,<br />
in very industrial areas, or near a railway<br />
rubbed brown<br />
col.40<br />
anthracite<br />
col.89<br />
white<br />
col.F8<br />
• Sanded solid forged iron, with anti-oxidation treatment<br />
(phosphatation) and stoved at 180°C (356°F) min.<br />
• 100% UV-resistant, does not discolour in the light and sun<br />
• Swimming pool and sea water resistant and repellent<br />
lava<br />
F10<br />
shingle<br />
F11<br />
• Does not require any specific maintenance, easy to clean<br />
• For outdoor and indoor use<br />
• Each item of furniture is assembled by hand<br />
• 100% recyclable<br />
Polished<br />
aluminium<br />
POA<br />
powdercoated aluminium<br />
• Fluidized powder coating applied to the aluminium structure by<br />
electrostatic spray. To ensure the solidity and resistance of the powder<br />
coating, the whole thing is stoved at a temperature between<br />
160°C (320°F) and 210°C (410°F) (T° according to type of powder)<br />
• Easy to clean and maintain<br />
(for specific maintenance see Manutti care line)<br />
• For outdoor and indoor use<br />
silver<br />
F0<br />
black<br />
F7<br />
white<br />
F8<br />
flax<br />
F9<br />
lava<br />
F10<br />
shingle<br />
F11<br />
stainless steel (sts)<br />
anodised aluminium (ana)<br />
stainless<br />
steel<br />
STS<br />
electropolished<br />
stainless steel<br />
ess<br />
• Stainless steel of type 316L and 304L<br />
• A special treatment several times a year is recommended;<br />
use our stainless steel wax protector to build up a protective film<br />
on the surface. Regular maintenance using the scotch brite sponge (supplied)<br />
combined with our stainless steel wax protector helps avoid dirt<br />
particles from penetrating and oxidising the surface. For easy removal<br />
of any rust formation on the surface, treatment with our stainless steel<br />
cleaner & restorer is duly advised (see Manutti care line)<br />
• Our stainless steel undergoes passivation before packaging<br />
• For outdoor and indoor use<br />
• We advise an “electropolish” treatment near the sea, a swimming pool,<br />
in very industrial areas, or near a railway<br />
anodised<br />
aluminium<br />
ana<br />
• Electrochemical surface treatment on aluminium<br />
• Protects the aluminum from mechanical wear and tear,<br />
chemical attack and corrosion.<br />
• Micron content: 27 MICRON oxide layer with open pores<br />
and a well-determined layer thickness formed<br />
• Recommended near the sea, a swimming pool, in very industrial areas,<br />
or near a railway<br />
• For outdoor and indoor use<br />
• Does not require any specific maintenance, easy to clean<br />
137<br />
general information<br />
G/a/s
Change language