Morrison Price List - Knoll

Power distribution components
Ported panel
data port, outlets, raceway connectors
Morrison
description type pattern no. list price
3 + 3 raceway connectors Base of adjacent panel to far side of 18,24W
MR3-TV24 PC $178.
panel
Base of adjacent panel to far side of 30,36W
MR3-TV36 PC 207.
panel
Base of adjacent panel to far side of 42,48W
MR3-TV48 PC 220.
panel
Base of same panel, adjacent panel to near side MR3-TVB PC 153.
Internal jumper to same circuit outlet MR3-TVI J 170.
Order Code
Specification Information
Application Notes
Example: MR3-VPBK
MR3 Morrison
VP Application
BK Bracket kit
Ported panel electrical components
connect to 2+2, four circuit and
3+3, six-circuit raceway
components to deliver
worksurface-height outlets within
the ported panel frame.
Floating data port allows data and
communication outlets to be
mounted at any location on the
ported panel face except directly
above or below electrical outlets.
Floating data ports include front and
back mounting plates.
PDC modules ( faceplates and
outlets ) are specified separately.
Vertical power and data ports for
ported panel are black finish and
require field cutting the panel insert
for installation.
Vertical power port bracket kit
includes an outlet mounting
bracket, a cover mounting bracket
and cover plate. Outlet mounting
bracket attaches to vertical rails of
panel frame.
Vertical duplex outlets are
dedicated for ported panel
application and are preconfigured to
access the circuit indicated by the
letter on the outlet face. All outlets
are black with white letters. Outlets
for circuits X,Y and Z are available
with orange face and black face with
orange triangle to signify protected
circuits for electronic equipment.
Base raceway duplex outlets will not
work in vertical port applications.
Vertical duplex outlets are
one-sided only and must be ordered
separately from the bracket kit.
Ported panel connectors power
vertical duplex outlets by joining
them to the base raceway of the
same or adjacent panel.
MR3-TVB PC connects a base
raceway rail with a vertical duplex
outlet in the same panel or mounted
on the near side of the adjacent
ported panel.
MR3-TV24, 36, 48 PC connect a
base raceway rail with a vertical
duplex outlet mounted on the far
side of, respectively, 18-24,
30-36,or42-48 wide ported
panels.
MR3-EVI J connects two vertical
duplex outlets of the same circuit
inside the ported panel frame.
Based on connector lengths, the
intended location of the centerline
of the vertical duplex outlet is 32
from the floor.
100