Morrison Price List - Knoll

Worksurfaces, 1 3 /4
30D
Morrison
description type w d h pattern no. lam. V1 V2
Straight, 30D Grommets 30 29 5 /8 1 3 /4 MW2-S3030-A-( ) $542. $754. $1,055.
36 29 5 /8 1 3 /4 MW2-S3630-A-( ) 600. 810. 1,132.
42 29 5 /8 1 3 /4 MW2-S4230-A-( ) 636. 867. 1,206.
48 29 5 /8 1 3 /4 MW2-S4830-A-( ) 691. 941. 1,301.
54 29 5 /8 1 3 /4 MW2-S5430-A-( ) 727. 1,015. 1,374.
60 29 5 /8 1 3 /4 MW2-S6030-A-( ) 767. 1,073. 1,495.
66 29 5 /8 1 3 /4 MW2-S6630-A-( ) 825. 1,148. 1,626.
72 29 5 /8 1 3 /4 MW2-S7230-A-( ) 916. 1,260. 1,760.
78 29 5 /8 1 3 /4 MW2-S7830-A-( ) 991. 1,374. 1,912.
84 29 5 /8 1 3 /4 MW2-S8430-A-( ) 1,065. 1,486. 2,087.
90 29 5 /8 1 3 /4 MW2-S9030-A-( ) 1,160. 1,633. 2,315.
96 29 5 /8 1 3 /4 MW2-S9630-A-( ) 1,269. 1,785. 2,542.
Straight 30D - no grommets No grommets 30 29 5 /8 1 3 /4 MW2-S3030-B-( ) 467. 677. 979.
36 29 5 /8 1 3 /4 MW2-S3630-B-( ) 522. 733. 1,054.
42 29 5 /8 1 3 /4 MW2-S4230-B-( ) 556. 784. 1,131.
48 29 5 /8 1 3 /4 MW2-S4830-B-( ) 614. 860. 1,224.
54 29 5 /8 1 3 /4 MW2-S5430-B-( ) 651. 939. 1,298.
60 29 5 /8 1 3 /4 MW2-S6030-B-( ) 688. 994. 1,416.
66 29 5 /8 1 3 /4 MW2-S6630-B-( ) 747. 1,071. 1,549.
72 29 5 /8 1 3 /4 MW2-S7230-B-( ) 837. 1,181. 1,685.
78 29 5 /8 1 3 /4 MW2-S7830-B-( ) 913. 1,298. 1,834.
84 29 5 /8 1 3 /4 MW2-S8430-B-( ) 988. 1,407. 2,007.
90 29 5 /8 1 3 /4 MW2-S9030-B-( ) 1,080. 1,555. 2,240.
96 29 5 /8 1 3 /4 MW2-S9630-B-( ) 1,187. 1,703. 2,467.
Worksurface Planning
Order Code
Example: MW2-S4230A-117
MW2 Worksurface, 1 3 /4 thick
S Straight worksurface
42 Width
30 Depth
A Grommets
117 Surface finish
Specification Information
Grommets/no grommets:
A- worksurface includes 3
grommet in each back
corner leading into desk
support or wire manager
clips.
B- worksurface does not include
grommets
Specify surface finish.
All worksurfaces are U.L.-listed.
105
Application Notes
30D worksurfaces are used
interchangeably in desk and panel
system applications as main
surfaces, extensions or credenza
tops. They must be supported at
each end by a pedestal, end panel,
end support cantilever or cantilever
bridging bracket with a maximum
span of 60 between supports.
All straight worksurfaces are 3 /8 less
than nominal depth for rear wire
clearance or privacy screens.
MW2- worksurfaces are supported
by brackets with machine screws.
Panel supported worksurfaces over
60 must be mid-span supported by
MB2-C18 bracket, specified
separately.
Plastic laminate worksurfaces are
post-formed top and bottom, front
and back.