Morrison Price List - Knoll

Cascade edge worksurfaces
Rectangular
Morrison
description w d h pattern no. Solid woodgrain
24D Rectangular 24 24 1 1 /8 MCE1R2424N $213. $245.
30 24 1 1 /8 MCE1R3024N 245. 282.
36 24 1 1 /8 MCE1R3624N 270. 312.
42 24 1 1 /8 MCE1R4224N 312. 359.
48 24 1 1 /8 MCE1R4824N 350. 403.
54 24 1 1 /8 MCE1R5424N 376. 432.
60 24 1 1 /8 MCE1R6024N 408. 469.
66 24 1 1 /8 MCE1R6624N 441. 506.
72 24 1 1 /8 MCE1R7224N 461. 530.
78 24 1 1 /8 MCE1R7824N 495. 568.
84 24 1 1 /8 MCE1R8424N 523. 601.
90 24 1 1 /8 MCE1R9024N 590. 677.
96 24 1 1 /8 MCE1R9624N 644. 740.
30D Rectangular 24 30 1 1 /8 MCE1R2430N 271. 313.
30 30 1 1 /8 MCE1R3030N 305. 350.
36 30 1 1 /8 MCE1R3630N 339. 390.
42 30 1 1 /8 MCE1R4230N 368. 422.
48 30 1 1 /8 MCE1R4830N 408. 469.
54 30 1 1 /8 MCE1R5430N 462. 531.
60 30 1 1 /8 MCE1R6030N 508. 583.
66 30 1 1 /8 MCE1R6630N 566. 651.
72 30 1 1 /8 MCE1R7230N 590. 677.
78 30 1 1 /8 MCE1R7830N 629. 723.
84 30 1 1 /8 MCE1R8430N 669. 769.
90 30 1 1 /8 MCE1R9030N 719. 827.
96 30 1 1 /8 MCE1R9630N 769. 884.
Order Code
Example: MCE1R4824N, 118
MCE1 Cascasde edge
worksurface
R Rectangular
48 Width
24 Depth
N No grommets
118 Surface finish
Specification Information
Specify:
Grommet / No grommet.
Replace the ‘‘N’’ suffix from the
pattern number with ‘‘G’’. Add $20.
Finish:
Solid:
114 Folkstone Grey
117 Soft Grey
118 Bright White
119 Pumice
Woodgrain:
124 Medium Cherry
125 Natural Maple
126 Natural Cherry
127 Walnut
144
Application Notes
Cascade Edge worksurfaces are
wrapped with a pvc free, 3D
laminate sheet heated and pressed
around an FSC certified substrate.
3D laminate is more susceptible to
denting, impact, tearing and
marring than conventional high
pressure laminate and should be
handled with care. Do not drag
worksurfaces across any flooring
surface. Treat Cascade Edge
worksurfaces like veneer
worksurfaces for optimum
performance under normal
conditions. Cascade Edge
worksurfaces have a 10 year
warranty that covers defects in
workmanship and materials. This
warranty does not cover damage
occurring during or after
installation. Cascade edge
worksurfaces in solid colors utilize a
non-PVC construction and are also
free of any plasticizers, phthalates
and lead content.
Cascade Edge are not drilled for
wire management clips, pedestals or
brackets. Cascade Edge
worksurfaces are for panel-based
planning only and cannot be used in
conjunction with Network desk
supports.
Worksurfaces are 1 /16 less then
nominal width and 3 /8 less than
nominal depth for rear wire
clearance.
Edge grommets are centered at rear
edge of worksurface for maximun
clearance of 1 3 /8
Worksurfaces require support every
48 in width. All supporting
hardware is ordered separately.
Worksurfaces may be supported at
each end by pedestals or end
support ‘‘EC’’ brackets and
cantilever brackets matching the
worksurface depth.
Panel supported worksurfaces over
48 must be mid-span supported by
cantilever brackets, specified
separately. Order Morrison brackets
with wood screws ( suffix-W).