Morrison Price List - Knoll

Morrison Options worksurfaces, 1 1/4
L-shape curvilinear
Morrison
description type w d h pattern no. lam. V1 V2
24D returns left and right 2 grommets 48 60 1 1 /4 LU1-C4860SS( ) $862. $1,173. $1,729.
48 72 1 1 /4 LU1-C4872SS( ) 992. 1,350. 1,990.
60 48 1 1 /4 LU1-C6048SS( ) 862. 1,173. 1,729.
72 48 1 1 /4 LU1-C7248SS( ) 992. 1,350. 1,990.
Corner grommet 42 42 1 1 /4 LU1-C4242SS( ) 697. 950. 1,396.
48 48 1 1 /4 LU1-C4848SS( ) 761. 1,036. 1,522.
24D return left, 30D right 2 grommets 48 60 1 1 /4 LU1-C4860SD( ) 862. 1,173. 1,729.
48 72 1 1 /4 LU1-C4872SD( ) 992. 1,350. 1,990.
60 48 1 1 /4 LU1-C6048SD( ) 862. 1,173. 1,729.
72 48 1 1 /4 LU1-C7248SD( ) 992. 1,350. 1,990.
Corner grommet 48 48 1 1 /4 LU1-C4848SD( ) 761. 1,036. 1,522.
30D return left, 24D right 2 grommets 48 60 1 1 /4 LU1-C4860DS( ) 862. 1,173. 1,729.
48 72 1 1 /4 LU1-C4872DS( ) 992. 1,350. 1,990.
60 48 1 1 /4 LU1-C6048DS( ) 862. 1,173. 1,729.
72 48 1 1 /4 LU1-C7248DS( ) 992. 1,350. 1,990.
Corner grommet 48 48 1 1 /4 LU1-C4848DS( ) 761. 1,036. 1,522.
30D returns left and right Corner grommet 48 48 1 1 /4 LU1-C4848DD( ) 761. 1,036. 1,522.
Worksurface Planning
Order Code
Example: LU1-C4860SD-117
LU1 Options worksurface,
1 1 /4
C L-shape curvilinear
48 Width left
60 Width right
S Depth of left return
D Depth of right return
117 Surface finish
Specification Information
Width dimension (W) refers to width
of left-side back edge; depth
dimension (D) indicates width of
right-side back edge.
S- 24D side edge
D- 30D side edge
Specify surface finish.
1 1 /4 curvilinear surfaces are solid
core construction with pilot holes at
all bracket locations.
LU1- worksurfaces are supported by
brackets with wood screws.
Corner worksurfaces with equal rear
edges have diagonal grain direction.
131
L-shape worksurfaces have grain
direction along the longer back
edge.
Application Notes
Options L-shaped curvilinear
worksurfaces may be supported by
left- or right-hand cantilever
brackets at the rear corner and
cantilever bridging bracket on each
side edge. Use mid-span support
whenever Options worksurfaces
span more than 48.
L-shape surfaces are veneer or
post-formed plastic laminate on
both back edges, matching profile
T-mold on curvilinear front, and
self-edge on sides.
Curvilinear worksurfaces are
available only in 1 1 /4 thickness.
L-shape surfaces are 3 /8 less than
nominal depth for rear wire
clearance or privacy screens.