Morrison Price List - Knoll

Cascade edge worksurfaces
Wave End
Morrison
description 1 2 3 A B h pattern no. solid woodgrain
Wave End, RH 36 30 24 3 15 1 1 /8 MCE1W362430N $573. $659.
42 30 24 9 15 1 1 /8 MCE1W422430N 602. 693.
48 30 24 15 15 1 1 /8 MCE1W482430N 645. 742.
72 30 24 30 1 /2 23 1 /2 1 1 /8 MCE1W722430N 821. 942.
Wave End, LH 36 24 30 15 3 1 1 /8 MCE1W363024N 573. 659.
42 24 30 15 9 1 1 /8 MCE1W423024N 602. 693.
48 24 30 15 15 1 1 /8 MCE1W483024N 645. 742.
78 24 30 23 1 /2 30 1 /2 1 1 /8 MCE1W723024N 821. 942.
Order Code
Specification Information
Application Notes
Example: MCE1W483024N-118
MCE1 Cascade edge
worksurface
W Wave end
48 Width
30 Depth left
24 Depth right
N No Grommet
118 Surface finish
Specify:
Grommet / no grommet.
Replace the ‘‘N’’ suffix from the
pattern number with ‘‘G’’. Add $20.
Finish:
Solid:
114 Folkstone Grey
117 Soft Grey
118 Bright White
119 Pumice
Woodgrain:
124 Medium Cherry
125 Natural Maple
126 Natural Cherry
127 Walnut
Cascade Edge worksurfaces are
wrapped with a pvc free, 3D
laminate sheet heated and pressed
around an FSC certified substrate.
3D laminate is more susceptible to
denting, impact, tearing and
marring than conventional high
pressure laminate and should be
handled with care. Do not drag
worksurfaces across any flooring
surface. Treat Cascade Edge
worksurfaces like veneer
worksurfaces for optimum
performance under normal
conditions. Cascade Edge
worksurfaces have a 10 year
warranty that covers defects in
workmanship and materials. This
warranty does not cover damage
occurring during or after
installation. Cascade edge
worksurfaces in solid colors utilize a
non-PVC construction and are also
free of any plasticizers, phthalates
and lead content.
Cascade Edge worksurfaces are not
drilled for wire management clips,
pedestals or brackets.
Worksurfaces are 1 /16 less than
nominal width and 3 /8 less than
nominal depth for rear wire
clearance.
Edge grommets are centered at rear
edge of worksurface for maximun
clearance of 1 3 /8.
Worksurfaces require support every
48 in width. All supporting
hardware is ordered separately.
Worksurfaces may be supported at
each end by pedestals or end
support ‘‘EC’’ brackets and
cantilever brackets matching the
worksurface depth. Use cantilever
bridging bracket to join to adjacent
worksurface.
Panel supported worksurfaces over
48 must be mid-span supported by
cantilever brackets, specified
separately. Order Morrison brackets
with wood screws ( suffix -W ).
Cascade Edge worksurfaces are for
panel-based planning only and
cannot be used in conjunction with
Network desk supports.
150