Morrison Price List - Knoll

Morrison Options worksurfaces, 1 1/4
Rectilinear and curvilinear corners for C-Leg and T-leg bases
24,30 and 36D
Morrison
description type d* d w* w h pattern no. L V1 V2
C-Leg Rectangular Tops, 24 Deep For use with 24D C-Leg base 24 23 36 34 1 1 /4 LU1-S3423-B-( ) $264. $475. $683.
24 23 42 40 1 1 /4 LU1-S4023-B-( ) 293. 490. 729.
24 23 48 46 1 1 /4 LU1-S4623-B-( ) 322. 530. 832.
24 23 54 52 1 1 /4 LU1-S5223-B-( ) 353. 595. 910.
24 23 60 58 1 1 /4 LU1-S5823-B-( ) 381. 625. 957.
24 23 66 64 1 1 /4 LU1-S6423-B-( ) 412. 690. 1,058.
24 23 72 70 1 1 /4 LU1-S7023-B-( ) 441. 736. 1,159.
C-Leg and T-Leg Rectangular Tops,
30 Deep
For use with 30D C-Leg base 30 29 36 34 1 1 /4 LU1-S3429-B-( ) 307. 501. 779.
30 29 42 40 1 1 /4 LU1-S4029-B-( ) 336. 547. 843.
For use with 30D C-Leg or T-Leg base 30 29 48 46 1 1 /4 LU1-S4629-B-( ) 367. 593. 908.
30 29 54 52 1 1 /4 LU1-S5229-B-( ) 395. 659. 991.
30 29 60 58 1 1 /4 LU1-S5829-B-( ) 426. 705. 1,073.
30 29 66 64 1 1 /4 LU1-S6429-B-( ) 453. 749. 1,171.
30 29 72 70 1 1 /4 LU1-S7029-B-( ) 498. 810. 1,250.
T-Leg Rectangular Tops, 36 Deep For use with 30D T-Leg base 36 35 48 46 1 1 /4 LU1-S4635-B-( ) 412. 656. 984.
36 35 54 52 1 1 /4 LU1-S5235-B-( ) 437. 723. 1,072.
36 35 60 58 1 1 /4 LU1-S5835-B-( ) 471. 785. 1,190.
36 35 66 64 1 1 /4 LU1-S6435-B-( ) 493. 808. 1,283.
36 35 72 70 1 1 /4 LU1-S7035-B-( ) 554. 884. 1,341.
C-Leg Corner Tops, 24 or 30 Deep For use with C-Leg Corner base 24 23 48 46 1 1 /4 LU1-C4646SS-( ) 761. 1,036. 1,522.
30 29 48 46 1 1 /4 LU1-C4646DD-( ) 761. 1,036. 1,522.
Worksurface Planning
Order Code
Specification Information
Application Notes
Example: LU1-S5829-B-118
LU1 Worksurface, 1 1 /4 thick
S Straight worksurface
58 Width
29 Depth
B No Grommets
118 Surface finish
w * = nominal width
Specify surface finish.
1 1 /4 Options worksurfaces are
3-ply, solid core construction.
Worksurfaces on this page are
designed for use with fixed and
height adjustable C-Leg, T-Leg and
corner bases to create freestanding
tables.
23,29 and 35 rectangular
worksurfaces are for use with
corresponding depth fixed and
height adjustable C-Leg bases and
T-Leg bases.
48x48 curvilinear corner
worksurfaces are for use with 16D
3-legged fixed and height adjustable
corner bases.
Worksurfaces are pre-drilled with
pilot holes for use with wood screws.
Actual worksurfaces are undersized
by 1 on each side edge and by 1
on the back edge.
Corner worksurfaces feature a
corner grommet.
137