Morrison Price List - Knoll

Morrison Options worksurfaces, 1 1/4
Wave-end surfaces
Morrison
description w d h pattern no. lam
Left wave-end - Grommet 36 29 5 /8 1 1 /4 LU1-W36AL( ) $717.
42 29 5 /8 1 1 /4 LU1-W42AL( ) 761.
48 29 5 /8 1 1 /4 LU1-W48AL( ) 806.
Left wave-end - No grommet 36 29 5 /8 1 1 /4 LU1-W36BL( ) 705.
42 29 5 /8 1 1 /4 LU1-W42BL( ) 746.
48 29 5 /8 1 1 /4 LU1-W48BL( ) 792.
Right wave-end - Grommet 36 29 5 /8 1 1 /4 LU1-W36AR( ) 717.
42 29 5 /8 1 1 /4 LU1-W42AR( ) 761.
48 29 5 /8 1 1 /4 LU1-W48AR( ) 806.
Right wave-end - No grommet 36 29 5 /8 1 1 /4 LU1-W36BR( ) 705.
42 29 5 /8 1 1 /4 LU1-W42BR( ) 746.
48 29 5 /8 1 1 /4 LU1-W48BR( ) 792.
Worksurface Planning
Order Code
Example: LU1-W48AL-117
LU1 Options worksurface,
1 1 /4
W Wave-end curvilinear
48 Width
A With grommets
L Left
117 Surface finish
Specification Information
1 1 /4 curvilinear surfaces are solid
core construction with pilot holes at
bracket and pedestal locations.
LU1- worksurfaces are supported by
brackets with wood screws.
Grommets/no grommets:
A- Worksurface includes one
edge grommet
B- Worksurface does not
include grommets
Specify surface finish.
Edge grommets are centered at rear
of worksurface.
Application Notes
Options wave-end curvilinear
worksurfaces are for panel planning
only and cannot be used in
conjunction with Network desk
supports.
Use cantilever bridging bracket to
join to adjacent 1 1 /4 worksurface.
Wave-end surfaces are post-formed
on back edge, matching profile
T-mold on curvilinear front, and
self-edge on sides.
Wave-end surfaces are available
only in plastic laminate, 1 1 /4
thickness.
Wave-end surfaces are nominal
30D at left or right, and align with
24D surface at the other end.
133