Line components Contents Page - Erawan Refrigeration Co., Ltd.

More documents

Recommendations

Info

Eliminator Ò Liquid line filter driers, type DCL and DML Dimensions and weights (continued) Solder connections Type A A 1 A 2 B L D 1 D 2 Weight mm mm mm mm mm mm mm kg DCL/DML 032s 66 16 50 70.6 98 46 43 0.20 DCL/DML 032.5s 66 16 50 71.4 101 46 43 0.20 DCL/DML 033s 66 16 50 72.4 104 46 43 0.20 DML 034s 66 16 50 74.0 108 46 43 0.21 DCL/DML 052s 75 24.5 50.5 79.6 107 58 54 0.39 DCL/DML 052.5s 75 24.5 50.5 80.4 110 58 54 0.39 DCL/DML 053s 75 24.5 50.5 81.4 113 58 54 0.39 DML 054s 75 24.5 50.5 83.0 117 58 54 0.40 DML 055s 75 24.5 50.5 83.0 125 58 54 0.41 DCL/DML 082s 101 50.5 50.5 105.6 133 58 54 0.40 DCL/DML 082.5s 101 50.5 50.5 106.4 136 58 54 0.40 DCL/DML 083s 101 50.5 50.5 107.4 139 58 54 0.40 DCL/DML 084s 101 50.5 50.5 109.0 143 58 54 0.41 DML 085s 101 50.5 50.5 109.0 151 58 54 0.42 DCL/DML 162s 110 55 55 114.6 142 80 76 0.79 DCL/DML 162.5s 110 55 55 115.4 145 80 76 0.79 DCL/DML 163s 110 55 55 116.4 148 80 76 0.79 DCL/DML 164s 110 55 55 118.0 152 80 76 0.81 DCL/DML 165s 110 55 55 118.0 160 80 76 0.82 DCL/DML 166s 110 55 55 117.6 164 80 76 0.84 DCL/DML 167s 110 55 55 120.0 170 80 76 0.85 DCL/DML 303s 186 - - 192.4 224 80 76 1.30 DCL/DML 304s 186 - - 194.0 228 80 76 1.31 DCL/DML 305s 186 - - 194.0 236 80 76 1.32 DCL/DML 306s 186 - - 193.6 240 80 76 1.34 DCL/DML 307s 186 - - 196.0 246 80 76 1.35 DCL/DML 309s 186 - - 196.0 250 80 76 1.37 DCL/DML 414s 187 - - 195.0 229 93 89 1.84 DCL/DML 415s 187 - - 195.0 237 93 89 1.85 DCL/DML 417s 187 - - 197.0 247 93 89 1.88 DCL/DML 419s 187 - - 197.0 251 93 89 1.90 DCL/DML 604s 337 - - 345.0 379 80 76 2.35 DML 606s 337 - - 344.6 391 80 76 2.39 DCL/DML 607s 337 - - 347.0 397 80 76 2.40 DCL/DML 609s 337 - - 347.0 401 80 76 2.41 DCL/DML 757s 338 - - 348.0 398 93 89 3.38 DCL/DML 759s 338 - - 348.0 402 93 89 3.40 12 Technical leaflet - RD6AM302 © Danfoss A/S (RC-CM / MWA), 06 - 2002
Filter drier with interchangeable solid core, type DCR Introduction DCR filter driers with interchangeable solid cores are for use in liquid and suction lines in refrigeration, freezing and air conditioning systems with fluorinated refrigerants. The block holders are designed for use in compact units where limited space makes it difficult to insert cores in DCR filter driers designed for three or four cores. When inserting into or removing cores from a DCR filter housing with the new take-apart block holder, no more clearance space is needed than for a two-core block holder. The take-apart block holder can also be used without taking it apart. Here the procedure is as with non-take-apart block holders. Filter core type 48-DN/DC Solid core with moisture and acid adsorption properties. Filter core type 48-DU/DM Solid core of 100% Molecular Sieves. For HFC systems. Filter core type 48-DA Solid core for acid adsorption after burnout. Filter core type 48-F Strainer for retaining dirt in suction and liquid lines. Features 48-DN/DC • Refrigerants: R 22, R 134a, R 404A and R 507. <strong>Co</strong>mpatible with blends containing R 124, R 125, R 134a, R 143a, R 152a, R 218, R 23 and R 32. • High drying capacity throughout whole temperature range. • Robust solid core withstands pressure surge and vibration. • Optimised, uniform grain size in the solid core gives effective dirt removal and low pressure drop. • Solid core consisting of - 3Å Molecular Sieves fully compatible with R 134a and R 404A. - Activated aluminium oxide for acid adsorption. 48-DU/DM • Refrigerants: R 134a, R 404a, R 407C, etc. • Solid core with 100% 3Å Molecular Sieves. Can be used with additives in polyolester oil. • High water adsorption. • Effective protection against impurities. 48-DA for burnout filters • Refrigerants: R 22, R 134a, R 404A and R 507. • Solid core with high acid adsorption and standard water adsorption. • Robust solid core withstands pressure surge and vibration. • Protects the compressor against acid, moisture, dirt and other harmful substances. • Optimum flow gives low pressure drop across the filter. 48-F strainer • Refrigerants: All fluorinated refrigerants. • For use in suction or liquid lines. • Retains dirt particles larger than 15 µm. • For direct use in DCR filter housings. Approvals CSUS listed, file SA 6398 A CSA certificate, no. 51840 Technical data DCR filter drier housing Refrigerant CFC, HCFC and HCF Temperature range −40 → 70°C Permissible working pressure DCR 048: PB = 35 bar DCR 096: PB = 35 bar DCR 144: PB = 35 bar DCR 192: PB = 28 bar © Danfoss A/S (RC-CM / MWA), 06 - 2002 Technical leaflet - RD6BD402 13
Page 1 and 2: Line components Contents Page Elimi
Page 3: Line components Contents Page Oil s
Page 6 and 7: Eliminator Ò Liquid line filter dr
Page 14 and 15: Filter drier with interchangeable s
Page 20 and 21: Bi-flow filter drier with flare and
Page 26 and 27: Eliminator Ò Burnoutfilter, type D
Page 29 and 30: Combined filter drier and receiver,
Page 31 and 32: Flare / solder adapter, type FSA In
Page 33 and 34: Sight glasses, type SGI, SGN, SGR a
Page 35 and 36: Sight glasses, type SGI, SGN, SGR a
Page 37 and 38: Check valves, type NRV and NRVH Int
Page 39 and 40: Check valves, type NRV and NRVH Cap
Page 41: Check valves, type NRV and NRVH Dim
Page 44 and 45: Shut-off valves, type BM Design Fun
Page 47 and 48: Shut-off valves, type GVC Introduct
Page 49 and 50: Ball valve, type GBC Introduction G
Page 51: Ball valve, type GBC Dimensions and
Page 54 and 55: Oil separators, type OUB Ordering O
Page 57 and 58: Heat exchangers, type HE Introducti
Page 59: Heat exchangers, type HE Design / F

Line components Contents Page - Erawan Refrigeration Co., Ltd.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?