Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Rear Module Basics<br />
-R2 and -R2S (High Density) I/O Available<br />
Select openGear ® cards support standard and high density rear I/O modules:<br />
The -R2 rear module occupies 2 slots in the OG3-FR platform and supports 1<br />
openGear ® card. The -R2 rear module is used for solutions that require access<br />
to the full I/O connections.<br />
The -R2S rear module occupies 2 slots in the OG3-FR platform and supports 2<br />
openGear ® cards. The -R2S rear module is used for solutions that require less<br />
I/O connections.<br />
EXAMPLE - Distribution Amplifiers:<br />
The SRA-8601A openGear ® card is designed as a 1x8 DA.<br />
SRA-8601A-R2<br />
In this configuration, the rear module (-R2) is designed with 1 openGear ® card<br />
connection and offers 10 BNCs to the openGear ® card allowing the operation as<br />
a 1x8 DA with up to 10 solutions in a single frame.<br />
SRA-8601A-R2S<br />
In this configuration, the rear module (-R2S) is designed with 2 openGear ® card<br />
connections and offers 5 BNCs to each openGear ® card. This allows the<br />
SRA-8601 to operate as a 1x4 DA with up to 20 independent solutions in a<br />
single frame.<br />
SRA-8601A-R2<br />
Ordering Information<br />
SRA-8601A-R2S<br />
Rear Module Basics | openGear ® p.15
Change language