Catalog - Ross Video

QSP-8229
3G HD SD
Quad Split
A cost-effective, single card solution for viewing up to 4 inputs on a single display.
3D
BKGD A SDI IN
(BNC 5)
BKGD A LOOP
(BNC 6)
BKGD B SDI IN
(BNC 1)
BKGD B LOOP
(BNC 2)
BKGD C SDI IN
(BNC 4)
BKGD C LOOP
(BNC 3)
BKGD D SDI IN
(BNC 8)
BKGD D LOOP
(BNC 7)
DESERIALIZER
DESERIALIZER
DESERIALIZER
DESERIALIZER
FRAME SYNC/
VIDEO SCALER
4:1
FRAME SYNC/
VIDEO SCALER
4:1
FRAME SYNC/
VIDEO SCALER
4:1
FRAME SYNC/
VIDEO SCALER
4:1
LINE SYNC
QUAD DISPLAY CONTROLLER
CROSSPOINT
PROC
AMP
PROC
AMP
PROC
AMP
PROC
AMP
SERIALIZER
SERIALIZER
SERIALIZER
SERIALIZER
DRIVER DRIVER DRIVER DRIVER
SDI OUT 1
(BNC 9)
SDI OUT 2
(BNC 10)
SDI OUT 3
(BNC 12)
SDI OUT 4
(BNC 13)
The QSP-8229 is a very cost-effective solution for monitoring
up to 4 video inputs. The 4 video inputs are combined into a
single quad split output with configurable UMD and bordering
capability. In addition to the 4 inputs, the QSP-8229 offers 4
independent outputs that can be configured to display either
the combined quad output or pass-through of the input, with
full proc control, offering additional outputs for use elsewhere.
Unique to the quad processor is passive looping inputs
allowing the card to fit into any video path without the need
for additional DAs. Looping is performed on the back module
ensuring the signal path is not lost even when the processor
is removed.
DashBoard control allows each quadrant to optionally display a
static source ID and / or borders with fully adjustable color and
transparency. Each output can be triggered to display the quad
split or full screen with local GPI control or remote DashBoard
control. This feature is extremely useful when a full screen
image is desired to verify video quality.
LINE SYNC
LOCAL REF
(BNC 11)
FRAME REF 1
FRAME REF 2
Ordering Information
Quad Split
QSP-8229
VIDEO
OUTPUT
TIMING
GENERATOR
Quad Split
LINE SYNC
LINE SYNC
Rear Module Suffix (ex: [model]-R2)
-R2 Rear Module for QSP-8229
-R2L
Looping Rear Module for QSP-8229
BKGD B IN
BKGD A IN
BKGD A LOOP
OUT 1
REF IN
BKGD B
LOOP
BKGD C
LOOP
LOCAL AREA
NETWORK
SERIAL PORT
8 GPI INPUTS
CARD
CONTROL
* Only 4 analog inputs are available
when using the -R2L split rear module.
BKGD C IN
BKGD D IN
BKGD D LOOP
OUT 2
SERIAL COM PORT
Key Features
• Quad image processor
• 4 passive looping inputs available with the -R2L looping rear
module
• 4 configurable outputs, pass-through / quad split
• Source ID labeling
• Quadrant bordering with adjustable width, color and
transparency
• Any quadrant can be taken full screen
•