Catalog - Ross Video

UDA-8705A AN-VID
Analog Utility Distribution Amplifier
A very useful device in HD / SD digital systems where there is a requirement for analog
signal distribution.
BNC 2**
BNC 1
+
ANLG
BNC 3
BNC 4
BNC 5
BNC 6
The UDA-8705A is an analog general purpose distribution
amplifier in the openGear ® platform. Use of this amplifier will
avoid the need to purchase a separate analog frame and power
supply in digital installations.
This amplifier may be used in any application where
equalization and a differential input is not required - an
excellent device for composite and tri-level sync distribution.
The use of new generation integrated circuits and innovative
engineering has resulted in excellent performance combined
with economy.
The -R2S high density split rear module can accommodate
up to 2x UDA-8705A cards, each configured as a 1x4 DA. The
-R2L offers a 1x8 DA with a passive looping input.
-
BNC 7*
TERM
LOOP
JP1
BNC 8*
BNC 9*
Ordering Information
Analog Utility Distribution Amplifier
UDA-8705A Analog Utility DA
GAIN
±3dB
BNC 10*
* Only 4 analog outputs are available
when using the -R2S split rear module.
** Looping input available with -R2L
rear module.
ANLG
IN
K
1
2
ANLG
LOOP
ANLG
2 IN
CARD 2 CARD 1
A
1
2
ANLG
1 IN
Key Features
• 1x4 or analog distribution amplifier
• DC coupled
• Wide adjustable gain range of ±3dB
• Low distortion
• Excellent isolation between outputs
• Power to each card is individually fused
• 20 DAs in OG3-FR
• 5-year transferable warranty
• Power: 1.5 watts
Rear Module Suffix (ex: [model]-R2)
-R2 Rear Module for UDA-8705A
-R2L
Looping Rear Module for UDA-8705A
-R2S
Split Rear Module for 2x UDA-8705A
ANLG
OUT
ANLG
OUT
ANLG
OUT
3 4
5 6
7 8
ANLG
OUT
ANLG
OUT
ANLG
OUT
ANLG
2 OUT
ANLG
2 OUT
ANLG
2 OUT
3 4
5 6
7 8
ANLG
1 OUT
ANLG
1 OUT
ANLG
1 OUT
9 10
p.26 Distribution & Monitoring | openGear ® UDA-8705A-R2L UDA-8705A-R2S
ANLG
OUT
ANLG
OUT
ANLG
2 OUT
ANLG
1 OUT
9 10