Commercial Heating - Ferroli

Technical specifications
Econcept 101
Output max/min.
Heat input kW 99.6/11.2
Useful heat output 80°C - 60°C kW 97.6/11.0
Useful heat output 50°C - 30°C kW 106.0/12.0
Efficiency (net)
80°C - 60°C Full load % 98.0
50°C - 30°C % 106.4
Part load (30%) % 109.0
NOx emissions
Class 5
Gas supply (natural gas G20)
Supply pressure mbar 20.0
Flow rate max/min m 3 /h 10.54/1.19
TREVERSE FLAME CERAMIC BURNERS
The ECONCEPT 101 modules feature
premix ceramic burners with reverse
micro-flame, each made up of six plates
fastened via a special gasket to a metal
frame capable of absorbing thermal
expansion. These burners have very low
polluting emissions, both NOx and CO2.
HEAT EXCHANGERS
The heat exchangers design, build and
materials ensure high efficiency, constant
performances reliability.
CASCADING OPERATION
The ECONCEPT101 series modules have
been developed for connection in series to
make up a single heat generator that, in
steps of 50kW, can have a total output of
around 500kW. Each with electronic
programming to ensure the optimum
operation from 11kW to 500kW.
Gas supply (LPG G31)
Supply pressure mbar 37.0
Flow rate max/min kg/h 7.8/0.88
Central heating
Maximum operating pressure bar 6
Hot water content litres 12.8
Dimensions, weights, fittings
Height mm 1650
Width mm 704
Depth mm 410
Weight (empty) kg 150
Gas fitting
Central heating fittings
DN50
DN80
Power supply
Max power input W 380
Power supply voltage/frequency V/Hz 230V/50Hz
Index of protection IP X5D
9