CR, CRI, CRN, CRE, CRIE, CRNE - Grundfos Canada

More documents

Recommendations

Info

Accessories CR, CRI, CRN, CRE, CRIE, CRNE Sensors for CRE, CRIE, CRNE Accessory Measuring range Product number 0-87 psi (0-6 bar) 91136169 Pressure sensor 0-145 psi (0-10 bar) 91136170 • Connection: 1/4" NPT 0-232 psi (0-16 bar) 91136171 Includes a 6 ft cable with removable potted plug 0-362 psi (0-25 bar) 91136172 in addition to a standard plug for remote mounting. 0-580 psi (0-40 bar) 91136173 0-870 psi (0-60 bar) 91136174 Gauges for CRE, CRIE, CRNE Accessory Measuring range Product number 30" Hg - 30 psi 91123566 0-60 psi 00ID8562 0-100 psi 00ID8563 Liquid filled pressure gauge 0-160 psi 00ID8564 • AISI 304/Copper 0-200 psi 00ID8565 0-300 psi 00ID8566 0-400 psi 00ID8567 0-600 psi 00ID8568 30" Hg - 30 psi 91130835 0-60 psi 00ID8569 0-100 psi 00ID8570 0-160 psi 00ID8571 Liquid filled pressure gauge • AISI 316 0-200 psi 00ID8572 0-300 psi 00ID8573 0-400 psi 00ID8574 0-600 psi 00ID8575 0-200 psi 00ID8576 82
Variants CR, CRI, CRN, CRE, CRIE, CRNE Lists of variants - on request Although the Grundfos CR(E), CRI(E), CRN(E) product range offers a number of pumps for different applications, customers require specific pump solutions to satisfy their needs. Below please find the range of options available for customizing the CR(E) pumps to meet the customers’ demands. Contact Grundfos for further information or for requests other than the ones mentioned below. Motors Variant Explosion proof motors Motors with anti-condensation heating unit Premium efficient motors Different motor brand Oversized motor 4-pole motors Description For operation in hazardous atmospheres, explosion-proof or dust-ignition-proof motors may be required. For operation in humid environments motors with built-in anti-condensation heating may be required. Grundfos offers motors from 1 to 100 Hp with a Premium efficiency class. If technically possible, Grundfos can fit the pump with a motor of a brand other than the standard. This will normally increase the time of delivery. Alternatively, the pump can be supplied without a motor (motor thrust rating must be checked). Ambient temperatures above 104 °F or installation at altitudes of more than 3280 ft above sea level require the use of an oversized motor (i.e. derating). Grundfos offers standard motors fitted with 4-poles. Connections and other variants Variant Pipe connections TriClamp connections Electropolished pumps Description In addition to the wide range of standard flange connections, a 232 Psi DIN standard clamping flange is available. Customized flanges are available according to specifications. TriClamp connections are of a hygienic design with a sanitary coupling for use in the pharmaceutical and food industry. To substantially reduce the risk of corrosion of the materials. For use in the pharmacentical/food industry. Shaft seals Variant Description Shaft seals with FFKM or FXM o-ring Shaft seal with material are recommended for applications where FFKM O-ring the pumped liquid may damage the standard O-ring material material. Seal with flush, Recommended for applications involving quench seal crystallizing, hardening or sticky liquids. Recommended for applications involving extremely high temperatures. No conventional mechanical shaft seal can withstand liquid temperatures of up to 356 °F for Cool-Top ® any length of time. shaft seal For that type of application, Grundfos’ unique aircooled shaft seal system is recommended. system In order to ensure a low liquid temperature around the standard shaft seal, the pump is fitted with a special air-cooled shaft seal chamber. No separate cooling is required. Recommended for applications involving poisonous or explosive liquids. Protects the surrounding environment and the Double shaft people working in the vicinity of the pump. seal with Consists of two seals mounted in a "back-to-back" pressure arrangement inside a separate pressure seal chamber chamber. As the pressure in the chamber is higher than the pump pressure, leakage is prevented. A dosing pump or a special pressure-intensifier generates the seal chamber pressure. Magnetically driven pumps for industrial applications. Key applications are industrial processes CRN MAGdrive involving the handling of aggressive, environmental, dangerous or volatile liquids, e.g. organic compounds, solvents, etc. Pumps Variant Horizontally mounted pump Low-temperature pump to –4 °F High-speed pump up to 681 psi High-pressure pump up to 696 psi Low-NPSH pump (improved suction) Belt-driven pumps Pumps for pharmaceutical and biotechnological applications Description For safety or height reasons, certain applications, for instance on ships, require the pump to be mounted in the horizontal position. For easy installation the pump is equipped with brackets that support motor and pump. Exposed to temperatures down to –40 °F, coolant pumps may require neck-rings with a different diameter in order to prevent impeller drag. For high-pressure applications, a unique pump capable of generating up to 681 psi pressure is available. The pump is equipped with a high-speed motor, type MLE. The direction of rotation is the opposite of that of standard pumps, and the chamber stack is turned upside-down, as a result of which the pumped liquid flows in the opposite direction. For high-pressure applications, a unique double pump system capable of generating up to 696 psi pressure is available. Recommended for boiler-feed applications where cavitation may occur due to poor inlet conditions. Belt-driven pumps designed to operate in places with limited space or where no electrical power is available. CRN(E) pumps designed for applications requiring the sterilization and CIP capability of pipes, valves and pumps. (CIP = Cleaning-In- Place). 83
Page 1 and 2:
GRUNDFOS PRODUCT GUIDE CR, CRI, CRN
Page 3 and 4:
Mission It is our mission — the b
Page 5 and 6:
Product overview CR, CRI, CRN, CRE,
Page 7 and 8:
Product overview CR, CRI, CRN, CRE,
Page 9 and 10:
UR Product overview CR, CRI, CRN, C
Page 11 and 12:
Product overview for E-pumps CR, CR
Page 13 and 14:
Control of E-pumps CR, CRI, CRN, CR
Page 15 and 16:
Construction CR, CRI, CRN, CRE, CRI
Page 17 and 18:
Type keys and codes CR, CRI, CRN, C
Page 19 and 20:
Operating and inlet pressure CR, CR
Page 21 and 22:
Selection and sizing CR, CRI, CRN,
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Technical data CR 1s D2 D1 D2 D1 B2
Page 29 and 30:
Technical data CRN 1s D1 D1 B2 B2 G
Page 31 and 32: Technical data CR(E) 1 D2 D1 D2 D1
Page 33 and 34: Technical data CRN(E) 1 D2 D1 D2 D1
Page 45 and 46: Technical data CRN(E) 10 D2 D1 D2 D
Page 55 and 56: Technical data CR(E) 32 TM02 7699 1
Page 57 and 58: Performance curves CR(E) 45, CRN(E)
Page 59 and 60: Technical data CRN(E) 45 TM02 7704
Page 61 and 62: Technical data CR(E) 64 TM02 7701 1
Page 63 and 64: Performance curves CR 90, CRN 90 CR
Page 65 and 66: Technical data CRN 90 D2 D1 4 STAGE
Page 67 and 68: Technical data CR 120 1-1 to 4-2 ST
Page 69 and 70: Performance curves CR, CRN 150 H [m
Page 71 and 72: Technical data CRN 150 1-3 STAGES 5
Page 73 and 74: Motor data CR, CRI, CRN, CRE, CRIE,
Page 75 and 76: Pumped liquids CR, CRI, CRN, CRE, C
Page 77 and 78: Accessories CR, CRI, CRN, CRE, CRIE
Page 79 and 80: Accessories CR, CRI, CRN, CRE, CRIE
Page 81: Accessories CR, CRI, CRN, CRE, CRIE
Page 85 and 86: Submittal data CR, CRI, CRN, CRE, C
Page 87 and 88: Quotation text CR, CRI, CRN, CRE, C
Page 89 and 90: Further documentation CR, CRI, CRN,
Page 92: Being responsible is our foundation
show all

CR, CRI, CRN, CRE, CRIE, CRNE - Grundfos Canada

Create successful ePaper yourself

Delete template?

Save as template?