OPTOCONTROL USER'S GUIDE - Opto 22

QUICK START
The previous figure shows the dialog box as it appears on Windows 2000. If you are
running Windows 95 or Windows 98, you will see fewer choices.
9. Select the communication port type you are using.
For this example, we’re using COM Port (a serial connection).
10. Enter a descriptive name for this port. Enter other communication data as required for your
port type.
The data you enter must correspond with your actual communication configuration. Consult
your system administrator if you need help.
11. Click Finish when done.
1-20 OptoControl User’s Guide