DM7 Disassembly Tutorial - PBportal.de

More documents

Recommendations

Info

Next you will need to disconnect the solenoid wire harness and the eye wire harness so they do not rip or break when pulling off the frame.
Page 1 and 2: DM7 Disassembly Tutorial (Included:
Page 4: Here are a few more pics in differe
Page 7 and 8: Step 3. Removal of the Fusebolt. Ok
Page 9: Take the fuse bolt apart. Unscrew t
Page 14 and 15: and the metal in front and behind t
Page 16: You want to take out the eyes and t
Page 24 and 25: Now you will need to pry out the ba
Page 27: Step 6. Removing the dm7 board. Usi
Page 32 and 33: Using your 3/32 Allen loosen the fr
Page 34 and 35: Now carefully remove the Ultralight
Page 36 and 37: Next you will need to take out the
Page 39 and 40: Step 8. OPTIONAL. Removing your ON/
Page 41: eech and didn’t tear up the bolt
Page 49: That black rubber thing is the mani
Page 53 and 54: Take off the lpr back cover behind
Page 55: Pull out the lpr by screwing a 10/3
Page 64: CONGRADULATIONS! YOU HAVE NOW TAKEN
Page 68: Step 13 Putting Ultralight trigger
Page 73:
Once this is done, then install the
Page 76:
Next you can put the frame back on
Page 80 and 81:
Step 14 Put your ASA back onto the
show all

DM7 Disassembly Tutorial - PBportal.de

Create successful ePaper yourself

Delete template?

Save as template?