DM7 Disassembly Tutorial - PBportal.de

More documents

Recommendations

Info

Step 2. Get your manual from your box and read it from cover to cover. This particular step will help you un<strong>de</strong>rstand your dm7 and it has a great troubleshooting section in the back. This will take about 20 minutes. The manual is an excellent reference tool and Dye went to a lot of trouble to make a simple and user friendly manual with fantastic pictures. Don’t be afraid to use it.
Step 3. Removal of the Fusebolt. Ok, getting started I recommend you take out the fusebolt first and clean the dye lube off. Use the ¼ Allen from your Allen set. Turn the back cap counter clockwise and pull the bolt out.
Page 1 and 2: DM7 Disassembly Tutorial (Included:
Page 4: Here are a few more pics in differe
Page 9: Take the fuse bolt apart. Unscrew t
Page 14 and 15: and the metal in front and behind t
Page 16: You want to take out the eyes and t
Page 21: Next you will need to disconnect th
Page 25: I want to quickly point out the uni
Page 31 and 32: Remove the Hyper 2 to get it out of
Page 33 and 34: Using your 3/32 Allen loosen the re
Page 35 and 36: Step 7. Removing the trigger. The f
Page 37: Gently slide the trigger out of the
Page 40 and 41: One of the problems was securing th
Page 45: Step 9. Removing the solenoid/ expl
Page 52 and 53: Step 10. Taking out the lpr and cle
Page 54 and 55: Unscrew the lpr set screw using a 5
Page 57:
Now you need to take this lpr apart
Page 66:
Your solenoid and on/off should alr
Page 71:
Next you will need to put in the on
Page 75 and 76:
Make sure you get the micro switch
Page 78:
Plug the solenoid harness and the e
Page 81:
Now put your grips back on and your
show all

DM7 Disassembly Tutorial - PBportal.de

Create successful ePaper yourself

Delete template?

Save as template?