Consolidated - Catalog 1700 series

1700
Dimensions & Weights (USCS)
1/2-14 NPT Drain
Drain Location
45°
45°
E
45°
45°
J
Cap and lever may be rotated 45°
horizontally to either side of centerline
Drain location for 4" & 6" valves is on centerline of outlet
***
F
Anchor discharge
piping solidly to
building structure
Fabricated
steel drip pan
D
DISMANTLING
HEIGHT (MAX.)
G
Vent(NPT)
(see caution)
Drain
H
C
(MAX.)
**
** Max. Dims
3" 150# - 7-1/4"
6" 150# - 12-1/2"
8" 150# - 16"
See Notes 1 & 2
B
(± 1/16)
A
( ± 1/16)
! C A U T I O N
Steam flow will occur through the coverplate vent
when the valve is in the open position. Do not plug.
Pipe to safe location. Refer to maintenance manual
for instructions.
Notes:
1. For lever clearance dimensions see page 1700.31.
2. Appropriate considerations should be made for draining any condensate which may accumulate in
the cover plate vent piping, body bowl drain, and drip pan elbow arrangement. See maintenance manual.
F
K
***The EVT-I and Hydroset require
15" clearance.
The EVT-II requires 17" clearance.
And an additional 8" is required when
the assisted closing device is utilized.
1700.21